Suggest to bring up a monitor interface and try to capture on the same channel. Check whether the beacon frame is available and etc.
---- Chun-Yeow On Mon, Sep 15, 2014 at 11:46 PM, Bob Copeland via Devel <[email protected]> wrote: > On Mon, Sep 15, 2014 at 08:39:52PM +0530, Ashish Gupta via Devel wrote: >> root@xyz:/home/yz# iw --debug dev wlan0 interface add mp1 type mp >> root@xyz:/home/yz# iw --debug dev mp1 set channel 2 >> root@xyz:/home/yz# ifconfig mp1 hw ether 94:a0:c0:b1:11:45 >> root@xyz:/home/yz# ifconfig mp1 192.168.3.84 >> >> root@xyz:/home/yz# iw --debug dev mp1 mesh join abcdefgh > > ^^^ should be mp0 (or is that a copy paste error)?? > >> root@xyz:/home/yz# iw dev mp0 station dump >> >> root@xyz:/home/yz# iw --debug dev mp1 mesh join abcdefgh >> command failed: Operation already in progress (-114) > > ^^^ because you already joined on mp1 (instead of mp0)? > >> Interface mp0 and mp1 on the SAME machine. >> Interface mp0 and mp1 on Different machines. > > Generally you will want them on different machines, because by > default frames won't get routed over the air if both interfaces > are local (though you can play games to make this happen anyway). > > -- > Bob Copeland %% www.bobcopeland.com > _______________________________________________ > Devel mailing list > [email protected] > http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel _______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
