Hi, for your wl1271 chipset you will require a patch different from your listed #3 which is ath9k-specific.
As for using wl1271 in mesh mode at all; I am not convinced this is as easy as you think it is. But I think I remember seeing some support patch though. Maybe someone else can help you here? --Marco Am 10.01.2015 um 15:52 schrieb Rudresh NB: > Hi Marco, > Thank You. I got following patch from Git, as per your > suggestion. > > $ git format-patch e339d0a1f41e76f2695c7d47c16e69382feac0f1 > > 0001-mac80211-move-mesh-sync-beacon-handler-into-neighbou.patch > 0002-mac80211-mesh-power-save-doze-scheduling.patch > 0003-ath9k-mesh-powersave-support.patch > > > So these patches are sufficient right? > > > Also I have one more question. I also need to support Mesh on TI Wilink > Chipset (http://www.ti.com/lit/ds/symlink/wl1271-tiwi-ble.pdf). > > In TI website they say Mesh is not supported. But I believe that chipset > which runs mac80211 should Mesh right. It does not depend on any PHY layer > right? > > Please confirm my understandings. > > Regards, > Rudresh > > > On 10 January 2015 at 20:12, Marco Porsch <[email protected] > <mailto:[email protected]>> wrote: > > Hi, > > to get functional mesh powersave going on ath9k wifi hardware you should > only require the last 3 commits from > https://github.com/cozybit/open80211s/commits/ft-powersave which we never got > mainlined. > > --Marco > > > Am 10.01.2015 um 15:38 schrieb Rudresh NB: > > Hi Marco, > > Thanks for your Quick Reply, I appreciate a lot. I am > working on PB44 Board which I have Openwrt (Barrier Break) version is > running. I have checked the Basic Mesh support and it works. I need to > further extend the support for Powersave on Mesh Links. So I was thinking to > take the patch from ft-powersave tree and apply to Openwrt supported kernel. > I am basically searching your Name in the Git log and taking the commit info > then doing the manual diff. > > > > Following is the commits done by you for ft-pwersave tree. > > > > 9aaddb3ad3a4639d4b2fc10de1a75a2780f41531 > > > > 28140ecb1c91aeb33bd63edd3a4d55a491922ab7 > > > > 65fbfeda81c51356ad927b39112ba3fca2037e20 > > > > e339d0a1f41e76f2695c7d47c16e69382feac0f1 > > > > 7cbf9d017dbb5e3276de7d527925d42d4c11e732 > > > > 3f52b7e328c526fa7a592af9bf5772c591ed38a4 > > > > 3b1c5a5307fb5277f395efdcf330c064d79df07d > > > > 9bdbf04db099c11bbbaea9dcea7465c508531fb8 > > > > eac70c135def117849faa7cc8b7ccb941498085f > > > > 1617bab8db81427392d424f2c7ffb5a3282c417c > > > > ea54fba20985b7a0cb8e1c8e2760a0865ee47763 > > > > 815b8092bd5242d580038213da9179a5a4f69116 > > > > da29d2a5780d80857773d7776b7603a449b0b6e0 > > > > 372039031c62886c8c5b57a7b0111446e9caefa8 > > > > 453e66f247f4ecb98cfef653164d428d087187d8 > > > > 40aefedc8b494d6a7006ceb9d051fbc58268c86e > > > > 65821635d26d3173a3b22781e2c60d5e6fcaeb22 > > > > d012a605108a482392be80710ea35f1db27c4aa9 > > > > f53c6a0d74dffd6e82defe195bd5b97c7d384341 > > > > df32381896f5f0c78a371df2e49ab7c776b1a5ba > > > > 52a3f20c09559465f821b54838decb397054e7de > > > > d5d9de024c157a3dfbab191241c5c51e4d4c069a > > > > > > > > Is this the way to go? or any other method you suggest?. > > > > Please suggest. > > > > Regards, > > Rudresh > > > > On 10 January 2015 at 19:46, Marco Porsch <[email protected] > <mailto:[email protected]> <mailto:[email protected] > <mailto:[email protected]>>> wrote: > > > > Hi, > > > > I am not sure if I understand you correctly, but I'll try to help. > > > > github has a cool feature to access patch files from commits: just > append ".patch" to the URI. > > E.g. choose your commit from > https://github.com/cozybit/open80211s/commits/ft-powersave, > > for example > https://github.com/cozybit/open80211s/commit/28140ecb1c91aeb33bd63edd3a4d55a491922ab7 > then append .patch to get > https://github.com/cozybit/open80211s/commit/28140ecb1c91aeb33bd63edd3a4d55a491922ab7.patch > > There you go! > > > > Unfortunately this code has not been updated in a while, so you may > have some trouble patching a recent kernel codebase. > > > > Best regards, > > Marco > > > > > > Am 10.01.2015 um 14:55 schrieb Rudresh NB via Devel: > > > Hi All, > > > How to get the patch which has only Mesh Powersave code > from ft-powersave tree. > > > > > > Thanks, > > > Rudresh > > > > > > > > > _______________________________________________ > > > Devel mailing list > > > [email protected] <mailto:[email protected]> > <mailto:[email protected] <mailto:[email protected]>> > > > http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel > > > > > > > > > _______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
