Interesting! > Is there a way to embed L3 information inside a mesh beacon frame or > RANN frame without modifying the firmware? Beacon and RANN action frame are both generated by the mac80211. So for adding vendor specific information, you probably need to look into the mac80211.
> The number of simultaneous file downloads was set to 16 and the link speeds > were varied from 100 kbps to 1400 kbps using the tc utility on both the > intermediate machines (G1 > and G2). G1 and G2, mesh gate are both set to same channel or frequency? If it is same channel, the radio itself is half duplex and also due to CSMA/CA so only, only one is able to Tx at one time. How much bandwidth gain that you achieve? What's the chipset are you using? Is this similar to link aggregation using bonding (http://linux-ip.net/html/ether-bonding.html#ether-bonding-aggregation) that you want to achieve? --- Chun-Yeow _______________________________________________ Devel mailing list [email protected] http://lists.open80211s.org/cgi-bin/mailman/listinfo/devel
