No worries, I figured this out. I had to add the samba-tools path before the command.
/usr/local/samba/bin/samba-tool domain provision --realm=oc.local --domain=OC --adminpass='openchange1!' --server-role='dc' It worked!! Thank Ray -----Original Message----- From: devel [mailto:[email protected]] On Behalf Of Raymond Potgieter Sent: 07 May 2014 11:56 AM To: 'Development list' Subject: Re: [openchange][devel] HowTo build OpenChange/Samba4 on CentOS 6.5 Hi Guys, I managed to get openchange and samba installed and now need to do a samba provision using the openchange cook book the next command is to run the following Configure Samba4 - Provision the Server - Provision Samba4 server as a domain controller. $ sudo PYTHONPATH=$PYTHONPATH samba-tool domain provision --realm=oc.local --domain=OC --adminpass='openchange1!' --server-role='dc' I get the error **** command not found:samba-tools *********** -----Original Message----- From: devel [mailto:[email protected]] On Behalf Of Raymond Sent: 05 May 2014 03:15 PM To: 'Development list' Subject: Re: [openchange][devel] HowTo build OpenChange/Samba4 on CentOS 6.5 Hi Julien, I think your command below did the trick to sort out the python version errors :-) ***** sed s/get_python_lib\(0,0/get_python_lib\(1,0/g -i >> script/installsamba4.sh ********* I will now follow the rest of the documentations on provisioning samba and creating openchange users etc. Thank you for the help so far. Ray -----Original Message----- From: devel [mailto:[email protected]] On Behalf Of Julien Kerihuel Sent: 30 April 2014 03:46 PM To: [email protected] Subject: Re: [openchange][devel] HowTo build OpenChange/Samba4 on CentOS 6.5 I just say you should go through the entire guide/tutorial first, then ask questions if something is not working as documented. Cheers, Julien. On 30/04/14 14:29, Raymond Potgieter wrote: > Sorry Julien but I am a bit lost here. really not understanding where > to begin now ... sigh... are you saying that I must not try and > install on centos 6.5 ? > > > > Ray > > > > > > > > -----Original Message----- > From: devel [mailto:[email protected]] On Behalf Of > Julien Kerihuel > Sent: 30 April 2014 01:56 PM > To: [email protected] > Subject: Re: [openchange][devel] HowTo build OpenChange/Samba4 on > CentOS 6.5 > > > On 30/04/14 13:28, Raymond Potgieter wrote: >> Hi Julien, thanks for this. On step no 3.2 below I presume samba must >> be installed already? > Hi Raymond, > > No. Installing Samba is step 3.3 > > Using currently packaged Samba is not going to work because it lacks > the availability of samba libraries required by OpenChange. > > Cheers, > Julien. > >> >> >> >> >> -----Original Message----- >> From: devel [mailto:[email protected]] On Behalf Of >> Julien Kerihuel >> Sent: 23 March 2014 01:08 AM >> To: [email protected] >> Subject: [openchange][devel] HowTo build OpenChange/Samba4 on CentOS >> 6.5 >> >> Good evening all, >> >> A while ago, I promised some instructions on building OpenChange on > CentOS. >> 1. Context and scope >> ============= >> >> - Two approaches have been tried. Firstly, install openchange on top >> of CentOS samba4 packages and secondly install openchange/samba4 from >> scratch in a minimal environment. >> >> - The first approach (install openchange on top of samba4 packaged >> for >> CentOS) has been a failure. It was caused by missing libraries in the >> devel RPM packages preventing OpenChange server from compiling properly. >> The best solution shall probably to inspect the RPM spec files and >> include missing libraries but I did not have time for this. >> >> - The second approach (install samba4/openchange couple from scratch) >> has been a success and the following section only focuses on >> different instruction/requirements needed to get it working. >> >> - This HowTo only focuses on samba4/openchange deployment. If you >> have been building SOGo on CentOS and want to contribute to >> openchange documentation, send your pull requests to >> openchange/website.git repository on GitHub. Any help you can provide >> in making CentOS users life easier with OpenChange will be welcomed! >> >> >> 2. Environment >> ========== >> >> For this test, I have been deploying CentOS 6.5 on a x86_64 architecture. >> The distribution was set as a minimal server. >> >> >> 3. Instructions >> ========= >> >> 3.1 Install Samba4 requirements >> -------------------------------------------- >> >> yum install git autoconf automake gcc python-devel popt-devel >> libacl-devel >> >> 3.2 Patch OpenChange samba4 build script >> ---------------------------------------------------------- >> >> When OpenChange build script defines pythondir, it computes the >> result of >> sysconfig.get_python_lib() function and defines platform_specific as > False. >> However, it sounds like Samba4 python bindings are installed in a >> patform_specific location. If prefix is /usr/local/samba, then >> bindings on CentOS will be installed in >> /usr/local/samba/lib64/python2.6/site-packages >> while the scripts expects them to be in >> /usr/local/samba/lib/python2.6/site-packages. The following command >> will fix >> samba4 compilation. >> >> sed s/get_python_lib\(0,0/get_python_lib\(1,0/g -i >> script/installsamba4.sh >> >> >> 3.3 Install Samba >> ----------------------- >> >> make samba >> >> >> 3.4 Update dynamic linker >> ----------------------------------- >> >> Update ld with non-standard path where we installed samba: >> >> echo '/usr/local/samba/lib' > /etc/ld.so.conf.d/samba4.conf echo >> '/usr/local/samba/lib64' >> /etc/ld.so.conf.d/samba4.conf ldconfig >> >> 3.5 Install OpenChange requirements >> --------------------------------------------------- >> >> yum install flex bison zlib-devel file-devel libical-devel >> >> >> Any other instructions from the cookbook should apply here - >> OpenChange compilation, server configuration etc. >> >> Br, >> Julien. >> >> -- >> Julien Kerihuel >> [email protected] >> OpenChange Project Founder >> >> Twitter: http://twitter.com/jkerihuel >> >> GPG Fingerprint: 0B55 783D A781 6329 108A B609 7EF6 FE11 A35F 1F79 >> >> >> >> _______________________________________________ >> devel mailing list >> [email protected] >> http://mailman.openchange.org/listinfo/devel > -- > Julien Kerihuel > [email protected] > OpenChange Project Founder > > Twitter: http://twitter.com/jkerihuel > > GPG Fingerprint: 0B55 783D A781 6329 108A B609 7EF6 FE11 A35F 1F79 > > > > _______________________________________________ > devel mailing list > [email protected] > http://mailman.openchange.org/listinfo/devel -- Julien Kerihuel [email protected] OpenChange Project Founder Twitter: http://twitter.com/jkerihuel GPG Fingerprint: 0B55 783D A781 6329 108A B609 7EF6 FE11 A35F 1F79 <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd";> <html xmlns="http://www.w3.org/1999/xhtml";> <head> <title>email-banner</title> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> </head> <body bgcolor="#FFFFFF" leftmargin="0" topmargin="0" marginwidth="0" marginheight="0"> </br> <a href="http://www.joburgtheatre.com";><img src="http://www.showbusiness.co.za/emailbanner/banner.jpg"; width="660" height="165" /> <!-- ImageReady Slices (banner4web.jpg) --><!-- End ImageReady Slices --></a></br> </body> </html> _______________________________________________ devel mailing list [email protected] http://mailman.openchange.org/listinfo/devel _______________________________________________ devel mailing list [email protected] http://mailman.openchange.org/listinfo/devel _______________________________________________ devel mailing list [email protected] http://mailman.openchange.org/listinfo/devel
![http://www.showbusiness.co.za/emailbanner/banner.jpg"](http://www.showbusiness.co.za/emailbanner/banner.jpg"){kind=link}