-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Somebody in the thread at some point said:
| Could you describe this in more detail,
|
| Where do i type these commands ?
|
| Andy Green wrote:
|> Somebody in the thread at some point said:
|> | Latest uImage-android seems to be broken - uboot gives Bad data CRC
|> | message with it.
|> | Can anybody post some older uImage-android ?
|>
|> No this is caused by U-Boot's default environment only pulling in 2MB
|> from the NAND partition for kernel. Increase it like this ->
|>
|> setenv bootcmd setenv bootargs \${bootargs_base} \${mtdparts}\; nand
|> read.e 0x32000000 kernel 0x300000\; bootm 0x32000000
|> saveenv
Ugh sorry U-boot has a kind of shell thing, you need to get in there
during a short window at boot when it should create a ttyACM0 on your
host PC. You use minicom or such to connect and bang on ENTER until it
stops and shows a prompt. Then the two commands shown above will
reprogram the U-Boot environment to pull larger kernels thereafter. You
can type
boot
to continue with the boot.
- -Andy
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iEYEARECAAYFAkk44psACgkQOjLpvpq7dMrv6wCdEAU2CMuME5/Bb7cPeKThsNVv
i8cAnjkuOO+UdOm8R4LylozXLWnXoPd5
=oB93
-----END PGP SIGNATURE-----
_______________________________________________
devel mailing list
devel@lists.openmoko.org
https://lists.openmoko.org/mailman/listinfo/devel
