Hi Andy, Thank you for the imediate reply.
I flashed the Qi image using the following command: [By booting GTA02 device in NOR flash mode] sudo dfu-util -a u-boot -R -U qi-s3c2442-master_a2d11c4dd18c9517.udfu [sudo] password for ram: dfu-util - (C) 2007 by OpenMoko Inc. This program is Free Software and has ABSOLUTELY NO WARRANTY Opening USB Device 0x0000:0x0000... Claiming USB DFU Runtime Interface... Determining device status: state = appIDLE, status = 0 Device really in Runtime Mode, send DFU detach request... Resetting USB... Opening USB Device... Found Runtime: [0x1d50:0x5119] devnum=105, cfg=0, intf=0, alt=1, name="u-boot" Claiming USB DFU Interface... Setting Alternate Setting ... Determining device status: state = dfuIDLE, status = 0 dfuIDLE, continuing Transfer Size = 0x1000 Resetting USB to switch back to runtime mode Thanks, Ram. Andy Green wrote: > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Somebody in the thread at some point said: > | Hi Andy, > | > | Sorry for not making it clear. > | > | Actually what happens is: > | > | 1) When I try booting > | (after flashing Qi into NAND from NOR flash mode and inserting SD card > | with ext3 partition containing Android images) by pressing the > | Power button for 10 secs, the device stops at the splash screen. > | Then I did cu to check what happened, I got the following: > | > | NAND read: device 0 offset 0x880000, size 0x5000 > | 20480 bytes read: OK > | Hit any key to stop autoboot: 0 > | > | NAND read: device 0 offset 0x80000, size 0x200000 > | 2097152 bytes read: OK > | ## Booting kernel from Legacy Image at 32000000 ... > | Image Name: OM GTA02 android_458301db547e537 > | Created: 2009-01-09 15:30:58 UTC > | Image Type: ARM Linux Kernel Image (uncompressed) > | Data Size: 2538032 Bytes = 2.4 MB > | Load Address: 30008000 > | Entry Point: 30008000 > | Verifying Checksum ... Bad Data CRC > | ERROR: can't get kernel image! > > This can be caused if the kernel is bigger than 2MBytes, the U-Boot env > var than does the load and boot defaults to ending there. > > | GTA02v6 # mmcinit > | cmd 0x8, arg 0x1aa flags 0x75 > | Error after cmd: 0xfffffffc > | Card Type: SD > | Manufacturer: 0x1b, OEM "SM" > | Product name: "SMI ", revision 1.0 > | Serial number: 155843909 > | Manufacturing date: 11/2007 > | MMC/SD size: 497MiB > | > | GTA02v6 # ext2ls mmc 1:1 /boot > | <DIR> 1024 . > | <DIR> 1024 .. > | 36 append-GTA02 > | 2533736 uImage-GTA02.bin > | > | It reads from NAND flash and not from SD card. > | So it fails to read from SD and tries reading > | from NAND. I dont know why. > | > | 2) After flashing QI, NAND menu should not occur > | as per wiki, but i see NAND menu when I press > | Power first aux next. I dont know why? Dont know > | whether I have flashed Qi or not? > > Right, no, as you suspect Qi would replace NAND U-Boot so you don't see > that any more. What dfu-util commandline did you use for this flashing > action, I guess the problem is there. > > You're definitely still running U-Boot above not Qi. > > - -Andy > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.9 (GNU/Linux) > Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org > > iEYEARECAAYFAklws4wACgkQOjLpvpq7dMpJfQCeO7Vp4h0cNN8QfmTyNz/QBgl7 > f4YAn1EgIqOWEJQoBgoY6yONvh9urXHX > =VWdG > -----END PGP SIGNATURE----- > > _______________________________________________ > devel mailing list > devel@lists.openmoko.org > https://lists.openmoko.org/mailman/listinfo/devel > > -- View this message in context: http://n2.nabble.com/Unable-to-modify-from-U-Boot-to-Qi.-tp2168838p2169129.html Sent from the Openmoko Devel mailing list archive at Nabble.com. _______________________________________________ devel mailing list devel@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/devel
