Werner,
Werner Almesberger wrote: > Philip Rhoades wrote: >> Finally got back to this - the AP is a Linksys WRT546G - original >> firmware I think. No encryption, just restricting access via MAC >> addressess. > > Good. I have a bunch of these around as well. Which firmware version ? > It should say so in small print in the upper right corner of the Web > GUI. 7.00.1 >> I have just done my WLAN uptime test on the latest FSO milestone (5) and >> the network stayed up for only about 4 hours (the record for an older >> version of SHR is about 14 hours). > > Did you check dmesg whether the association was still there ? One > thing that could cause such troubles is DHCP trying to renew the > lease and something going wrong there. > > One way to find out would be to run > > iwconfig eth0 > ifconfig eth0 > route -n > > while the connection is good, record the output, and run these > commands again after the connection has failed. Then post them > here for analysis :-) Including a dmesg output wouldn't hurt > either. OK, will do. Thanks! Phil. -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: p...@pricom.com.au _______________________________________________ devel mailing list devel@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/devel
