I'm getting this with every firmware since at least 20090209. Happens
almost every time you set interface to ad-hoc mode with iwconfig.
Best regards
Peter Kraker
Alon Bar-Lev wrote:
Update!
I am using git latest, and decided to recompile minimal kernel based
on the micro configuration,
Some setting were required in order to make the ar6000 load, and now
after the wmiconfig
it actually works!!!!
But now I need to unload/load it after boot as for some strange reason
the driver
cannot detect its hardware correctly?!?!
Also, I am gettings these, and device is not available until reboot.
AR6000 disconnected
neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio 0
neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio 0
mmc1: card 0001 removed
ar6000_wow interrupt
s3c2440-sdi s3c2440-sdi: powered down.
s3c2440-sdi s3c2440-sdi: powered down.
Need to figure out how to make this stable.
Thank you.
Alon.
On Tue, Mar 10, 2009 at 12:57 AM, Alon Bar-Lev <alon.bar...@gmail.com> wrote:
Thank you!
No the wmiconfig is not working...
Even if I can workaround the issue at my home AP, what will happen in
other places...?
Does anyone know why the wireless driver is not based on standard
kernel wireless interfaces (MAC80211 or IEEE80211)?
Alon.
On Mon, Mar 9, 2009 at 3:42 AM, Werner Almesberger <wer...@openmoko.org> wrote:
Alon Bar-Lev wrote:
[1] http://docs.openmoko.org/trac/ticket/1250
Two things to try:
1) Does
wmiconfig -i eth0 --setlongpreamble 0
make things work ?
2) If DD-WRT lets you enable long preambles, doing this should avoid
the problem.
Please let me know if any of this helps. I'm particularly curious
about 1).
Thanks,
- Werner
_______________________________________________
devel mailing list
devel@lists.openmoko.org
https://lists.openmoko.org/mailman/listinfo/devel
_______________________________________________
devel mailing list
devel@lists.openmoko.org
https://lists.openmoko.org/mailman/listinfo/devel
