Hi mobi phil wrote: > I run both x11perf, and a little program to draw > rectangles on the framebuffer. The speed ratio between the openmoko and eten > m800 framebuffer is 7/10, this measured with my small tool. I run "x11perf > -all" on the ETEN M800 with the Xfbdev, you will find the results attached. > I tried to run x11pref -all on freerunner with Xfbdev but it crashes at the > beginning of the second test... I will try to run the same > > here the comparison of the first test (Dot) > for gnufiish > > > 6000000 reps @ 0.0009 msec (1120000.0/sec): Dot > 6000000 reps @ 0.0009 msec (1130000.0/sec): Dot > 6000000 reps @ 0.0009 msec (1120000.0/sec): Dot > 6000000 reps @ 0.0009 msec (1120000.0/sec): Dot > 6000000 reps @ 0.0009 msec (1130000.0/sec): Dot > 30000000 trep @ 0.0009 msec (1120000.0/sec): Dot > > for freerunner.. > > 2000000 reps @ 0.0025 msec (394000.0/sec): Dot > 2000000 reps @ 0.0025 msec (402000.0/sec): Dot > 2000000 reps @ 0.0025 msec (393000.0/sec): Dot > 2000000 reps @ 0.0028 msec (360000.0/sec): Dot > 2000000 reps @ 0.0026 msec (391000.0/sec): Dot > 10000000 trep @ 0.0026 msec (388000.0/sec): Dot
I'm not sure why it's so slow for you, but I just did a x11perf -dot on my freerunner and the number I'm seeing are: 6000000 reps @ 0.0009 msec (1170000.0/sec): Dot 6000000 reps @ 0.0009 msec (1170000.0/sec): Dot 6000000 reps @ 0.0009 msec (1170000.0/sec): Dot 6000000 reps @ 0.0009 msec (1170000.0/sec): Dot 6000000 reps @ 0.0009 msec (1170000.0/sec): Dot 30000000 trep @ 0.0009 msec (1170000.0/sec): Dot This was done with ShadowFB disabled. In case you did your test with ShadowFB enabled: 10000000 reps @ 0.0005 msec (1900000.0/sec): Dot 10000000 reps @ 0.0005 msec (1900000.0/sec): Dot 10000000 reps @ 0.0005 msec (1900000.0/sec): Dot 10000000 reps @ 0.0005 msec (1900000.0/sec): Dot 10000000 reps @ 0.0005 msec (1900000.0/sec): Dot 50000000 trep @ 0.0005 msec (1900000.0/sec): Dot - Lars _______________________________________________ devel mailing list devel@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/devel