Hal Murray <[email protected]>: > > > The other problem is a bit more serious. I can't seem to get my ntpd to > > report mrulist entries. This hampers testing of ntpmon; the lower window is > > supposed to be an mrulist display. Right now I can only demonstrate the > > upper half, the automatically-refreshing peers display. > > It will probably be simple after we find it. > > Send me a copy of your ntp.conf
# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help driftfile /var/lib/ntp/ntp.drift # Enable this if you want statistics to be logged. statsdir /var/log/ntpstats/ statistics loopstats peerstats clockstats rawstats filegen loopstats file loopstats type day enable filegen peerstats file peerstats type day enable filegen clockstats file clockstats type day enable #refclock shm unit 0 flag4 1 refid GPS #refclock shm unit 1 prefer flag4 1 refid PPS #refclock nmea baud 9600 path /dev/ttyUSB0 # Specify one or more NTP servers. #server [2001:470:e815::8] maxpoll 5 # spidey.rellim.com # Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board # on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for # more information. #server 0.ubuntu.pool.ntp.org #server 1.ubuntu.pool.ntp.org #server 2.ubuntu.pool.ntp.org #server 3.ubuntu.pool.ntp.org pool us.pool.ntp.org # Use Ubuntu's ntp server as a fallback. #server ntp.ubuntu.com # Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for # details. The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions> # might also be helpful. # # Note that "restrict" applies to both servers and clients, so a configuration # that might be intended to block requests from certain clients could also end # up blocking replies from your own upstream servers. # By default, exchange time with everybody, but don't allow configuration. restrict -4 default notrap nomodify nopeer noquery restrict -6 default notrap nomodify nopeer noquery # Local users may interrogate the ntp server more closely. restrict 127.0.0.1 restrict ::1 # Clients from this (example!) subnet have unlimited access, but only if # cryptographically authenticated. #restrict 192.168.123.0 mask 255.255.255.0 notrust # If you want to provide time to your local subnet, change the next line. # (Again, the address is an example only.) #broadcast 192.168.123.255 # If you want to listen to time broadcasts on your local subnet, de-comment the # next lines. Please do this only if you trust everybody on the network! #disable auth #broadcastclient keys /usr/local/etc/ntp.keys trustedkey 10 controlkey 10 > What do you have on your waf configure line? ./waf configure --enable-crypto --refclock=all --enable-doc -- <a href="http://www.catb.org/~esr/";>Eric S. Raymond</a> _______________________________________________ devel mailing list [email protected] http://lists.ntpsec.org/mailman/listinfo/devel
