Yo Hal! On Wed, 12 Aug 2020 13:03:01 -0700 Hal Murray <hmur...@megapathdsl.net> wrote:
> > You can see I have the new one installed:
>
> Then either the new one is buggy or you aren't using it at runtime.
Which does not narrow it down much.
> magic.py is made by a script. It just copies the right chunks from
> ntp.h and changes #define xx yy to xx = yy. (or something close to
> that) You can easily check to see if your magic.py has
> MODE_BROADCASTx or the old MODE_BROADCAST (without the x).
It had the old one:
build/main/ntpclients/ntp/magic.py:MODE_BROADCAST = 5 # broadcast
mode
> Did you do a clean build after git pull?
./waf clean
./waf configure --refclock=all && ./waf build &&./waf install
> If not, then maybe waf
> wasn't smart to rebuild magic.py
Maybe so.
I did a complete "rm -R ntpsec" and git clone. Which I thought I had done
already, and now it works. So maybe the c;ean is a problem? My previous
file times would also indicate that.
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
g...@rellim.com Tel:+1 541 382 8588
Veritas liberabit vos. -- Quid est veritas?
"If you can't measure it, you can't improve it." - Lord Kelvin
pgpjSqb2TEEv8.pgp
Description: OpenPGP digital signature
_______________________________________________ devel mailing list devel@ntpsec.org http://lists.ntpsec.org/mailman/listinfo/devel
