fcoemon and fcoeadm had several spelling errors. Signed-off-by: Eric Multanen <[email protected]> ---
doc/fcoeadm.8 | 8 ++++---- doc/fcoeadm.txt | 4 ++-- doc/fcoemon.8 | 16 ++++++++-------- doc/fcoemon.txt | 12 ++++++------ 4 files changed, 20 insertions(+), 20 deletions(-) diff --git a/doc/fcoeadm.8 b/doc/fcoeadm.8 index 7aef6ae..c82ca86 100644 --- a/doc/fcoeadm.8 +++ b/doc/fcoeadm.8 @@ -2,12 +2,12 @@ .\" Title: fcoeadm .\" Author: [FIXME: author] [see http://docbook.sf.net/el/author] .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/> -.\" Date: 04/01/2010 +.\" Date: 04/29/2010 .\" Manual: Open-FCoE Tools .\" Source: Open-FCoE .\" Language: English .\" -.TH "FCOEADM" "8" "04/01/2010" "Open\-FCoE" "Open\-FCoE Tools" +.TH "FCOEADM" "8" "04/29/2010" "Open\-FCoE" "Open\-FCoE Tools" .\" ----------------------------------------------------------------- .\" * set default formatting .\" ----------------------------------------------------------------- @@ -72,12 +72,12 @@ Show information about the discovered targets associated with the FCoE instance .PP \fB\-l\fR, \fB\-\-lun\fR [\fIethX\fR] .RS 4 -Show detailed information about the discovered SCSI LUNs associated with the FCoE instance on the specified network interface\&. If no network interface is specifed, information about SCSI LUNs from all FCoE instances will be shown\&. +Show detailed information about the discovered SCSI LUNs associated with the FCoE instance on the specified network interface\&. If no network interface is specified, information about SCSI LUNs from all FCoE instances will be shown\&. .RE .PP \fB\-s\fR, \fB\-\-stats\fR \fIethX\fR [\fIinterval\fR] .RS 4 -Show the statistics (including FC4 statistics) of the FCoE interface on the specfied network interface\&. The information will be display in one line on the screen per given time interval\&. +Show the statistics (including FC4 statistics) of the FCoE interface on the specified network interface\&. The information will be display in one line on the screen per given time interval\&. \fIinterval\fR should be specified in whole integers greater than 0\&. It specifies the time interval in the unit of seconds\&. If \fIinterval\fR diff --git a/doc/fcoeadm.txt b/doc/fcoeadm.txt index 0bd73cf..2b1cf0a 100644 --- a/doc/fcoeadm.txt +++ b/doc/fcoeadm.txt @@ -77,12 +77,12 @@ OPTIONS *-l*, *--lun* [_ethX_]:: Show detailed information about the discovered SCSI LUNs associated with the FCoE instance on the specified network interface. - If no network interface is specifed, information about SCSI LUNs + If no network interface is specified, information about SCSI LUNs from all FCoE instances will be shown. *-s*, *--stats* _ethX_ [_interval_]:: Show the statistics (including FC4 statistics) of the FCoE - interface on the specfied network interface. + interface on the specified network interface. The information will be display in one line on the screen per given time interval. _interval_ should be specified in whole integers greater than 0. It specifies the time interval in the unit of diff --git a/doc/fcoemon.8 b/doc/fcoemon.8 index 0ff3637..c7f6623 100644 --- a/doc/fcoemon.8 +++ b/doc/fcoemon.8 @@ -2,12 +2,12 @@ .\" Title: fcoemon .\" Author: [FIXME: author] [see http://docbook.sf.net/el/author] .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/> -.\" Date: 04/01/2010 +.\" Date: 04/29/2010 .\" Manual: Open-FCoE Tools .\" Source: Open-FCoE .\" Language: English .\" -.TH "FCOEMON" "8" "04/01/2010" "Open\-FCoE" "Open\-FCoE Tools" +.TH "FCOEMON" "8" "04/29/2010" "Open\-FCoE" "Open\-FCoE Tools" .\" ----------------------------------------------------------------- .\" * set default formatting .\" ----------------------------------------------------------------- @@ -70,7 +70,7 @@ command\&. .PP \fIDCB\fR .RS 4 -Data Center Bridging A set of Ethernet enchancement standards developed by the IEEE 802\&.1 Working Group\&. +Data Center Bridging A set of Ethernet enhancement standards developed by the IEEE 802\&.1 Working Group\&. .RE .PP \ \& @@ -82,8 +82,8 @@ for more information\&. .PP \fIDCBX\fR .RS 4 -DCB Capabilitues Exchange Protocol, implemented by the DCB module of -\fBlldpad\fR\&. DCBX exchanges DCB capabilities and configuration with a link partner as a series of values tranfered using the Link Layer Discovery Protocol (LLDP)\&. +DCB Capabilities Exchange Protocol, implemented by the DCB module of +\fBlldpad\fR\&. DCBX exchanges DCB capabilities and configuration with a link partner as a series of values transfered using the Link Layer Discovery Protocol (LLDP)\&. .RE .PP \fIPFC\fR @@ -101,7 +101,7 @@ The FCoE instance of application specific parameters in DCBX\&. .sp \fBfcoemon\fR uses two information sources for determining when to create an FCoE instance: the state of the network interface, which may be a VLAN interface, and, if required for the FCoE instance, the state of the DCB configuration on the physical Ethernet interface\&. .sp -First of all, the network interface must be "up" for the FCoE instance to be created\&. Secondly, if the FCoE configuration indicates that DCB is required, then the following criteria must be satisified before the FCoE interface is created: +First of all, the network interface must be "up" for the FCoE instance to be created\&. Secondly, if the FCoE configuration indicates that DCB is required, then the following criteria must be satisfied before the FCoE interface is created: .sp .RS 4 .ie n \{\ @@ -326,7 +326,7 @@ indicates if the DCB service is required on the Ethernet interface\&. .PP \fIAUTO_VLAN\fR .RS 4 -indictaes if VLAN discovery should be performed\&. If AUTO_VLAN is set to "yes", then once the link configuration has been validated, +indicates if VLAN discovery should be performed\&. If AUTO_VLAN is set to "yes", then once the link configuration has been validated, \fBfcoemon\fR will run run the FIP VLAN discovery protocol on the Ethernet interface\&. Network interfaces for any discovered FCoE VLANs will be automatically created, if they are not already configured, and FCoE instances will be created on the VLAN interfaces\&. If the network interface specified by the filename is already a VLAN interface, the AUTO_VLAN setting is ignored\&. .RE @@ -337,7 +337,7 @@ Note that the attached Ethernet peer device (e\&.g\&. FCoE capable switch port) This is the \fBfcoe\fR system service script\&. This script is invoked by the init process or by the service command to start and stop the \fBfcoemon\fR\&. .SH "VLAN NAMING CONVENTIONS" .sp -If a new VLAN device is created (see the desription of the \fIAUTO_VLAN\fR setting above), it will have the name \fIdev\fR\&.\fIvlan\fR\-fcoe; where \fIdev\fR is the name of the Ethernet parent device and \fIvlan\fR is the discovered VLAN ID number\&. +If a new VLAN device is created (see the description of the \fIAUTO_VLAN\fR setting above), it will have the name \fIdev\fR\&.\fIvlan\fR\-fcoe; where \fIdev\fR is the name of the Ethernet parent device and \fIvlan\fR is the discovered VLAN ID number\&. .SH "SEE ALSO" .sp \fBfcoeadm\fR(8) \fBlldpad\fR(8) \fBlldptool\fR(8) \fBdcbtool\fR(8) diff --git a/doc/fcoemon.txt b/doc/fcoemon.txt index 39c845b..f42c8c0 100644 --- a/doc/fcoemon.txt +++ b/doc/fcoemon.txt @@ -67,16 +67,16 @@ OPTIONS TERMINOLOGY ----------- _DCB_:: - Data Center Bridging A set of Ethernet enchancement standards + Data Center Bridging A set of Ethernet enhancement standards developed by the IEEE 802.1 Working Group. :: See <http://www.ieee802.org/1/pages/dcbridges.html> for more information. _DCBX_:: - DCB Capabilitues Exchange Protocol, implemented by the DCB module + DCB Capabilities Exchange Protocol, implemented by the DCB module of *lldpad*. DCBX exchanges DCB capabilities and configuration with - a link partner as a series of values tranfered using the Link Layer + a link partner as a series of values transfered using the Link Layer Discovery Protocol (LLDP). _PFC_:: @@ -94,7 +94,7 @@ configuration on the physical Ethernet interface. First of all, the network interface must be "up" for the FCoE instance to be created. Secondly, if the FCoE configuration indicates that DCB is -required, then the following criteria must be satisified before the FCoE +required, then the following criteria must be satisfied before the FCoE interface is created: * DCB is enabled on the Ethernet interface. @@ -178,7 +178,7 @@ _DCB_REQUIRED_:: indicates if the DCB service is required on the Ethernet interface. _AUTO_VLAN_:: - indictaes if VLAN discovery should be performed. If AUTO_VLAN is + indicates if VLAN discovery should be performed. If AUTO_VLAN is set to "yes", then once the link configuration has been validated, *fcoemon* will run run the FIP VLAN discovery protocol on the Ethernet interface. Network interfaces for any discovered FCoE @@ -197,7 +197,7 @@ init process or by the service command to start and stop the *fcoemon*. VLAN NAMING CONVENTIONS ----------------------- -If a new VLAN device is created (see the desription of the _AUTO_VLAN_ +If a new VLAN device is created (see the description of the _AUTO_VLAN_ setting above), it will have the name _dev_._vlan_-fcoe; where _dev_ is the name of the Ethernet parent device and _vlan_ is the discovered VLAN ID number. _______________________________________________ devel mailing list [email protected] http://www.open-fcoe.org/mailman/listinfo/devel
