On 12/24/2010 12:02 AM, Bhanu Gollapudi wrote:
diff --git a/drivers/scsi/bnx2fc/57xx_fcoe_constants.h
b/drivers/scsi/bnx2fc/57xx_fcoe_constants.h
new file mode 100644
index 0000000..c1b4e77
--- /dev/null
+++ b/drivers/scsi/bnx2fc/57xx_fcoe_constants.h
@@ -0,0 +1,261 @@
+#ifndef __57XX_FCOE_CONSTANTS_H_
+#define __57XX_FCOE_CONSTANTS_H_
+
+/**
+ * This file defines HSI constants for the FCoE flows
+ */
+
There is a bunch of old defines and maybe structs that are not used.
Remove them.
+#endif /* __57XX_FCOE_HSI_LINUX_LE__ */
diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h
new file mode 100644
index 0000000..0ba6d2e
--- /dev/null
+++ b/drivers/scsi/bnx2fc/bnx2fc.h
@@ -0,0 +1,545 @@
+#ifndef _BNX2FC_H_
+#define _BNX2FC_H_
+/* bnx2fc.h: Broadcom NetXtreme II Linux FCoE offload driver.
+ *
+ * Copyright (c) 2008 - 2010 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Bhanu Prakash Gollapudi ([email protected])
+ */
+
+#include<linux/version.h>
+#include<linux/module.h>
+#include<linux/moduleparam.h>
+
+#include<linux/kernel.h>
+#include<linux/skbuff.h>
+#include<linux/netdevice.h>
+#include<linux/etherdevice.h>
+#include<linux/ethtool.h>
+#include<linux/if_ether.h>
+#include<linux/if_vlan.h>
+#include<linux/kthread.h>
+#include<linux/crc32.h>
+#include<linux/cpu.h>
+
+#include<linux/types.h>
+#include<linux/list.h>
+#include<linux/delay.h>
+#include<asm/byteorder.h>
+#include<linux/timer.h>
+#include<linux/errno.h>
+#include<linux/pci.h>
+#include<linux/init.h>
+#include<linux/dma-mapping.h>
+#include<linux/workqueue.h>
+#include<linux/mutex.h>
+#include<linux/spinlock.h>
+#include<linux/bitops.h>
+#include<linux/log2.h>
+
+#include<net/tcp.h>
+
+#include<scsi/scsi.h>
+#include<scsi/scsi_host.h>
+#include<scsi/scsi_device.h>
+#include<scsi/scsi_cmnd.h>
+#include<scsi/scsi_eh.h>
+#include<scsi/scsi_tcq.h>
+#include<scsi/fc/fc_fip.h>
+#include<scsi/fc/fc_fc2.h>
+#include<scsi/libfc.h>
+#include<scsi/libfcoe.h>
+#include<scsi/fc_frame.h>
+
+#include<scsi/fc/fc_fcoe.h>
+
+#include<scsi/scsi_transport.h>
+#include<scsi/scsi_transport_fc.h>
+
+#include<linux/fs.h>
+#include<linux/mm.h>
+#include<linux/interrupt.h>
+#include<linux/sched.h>
+#include<linux/uaccess.h>
+#include<linux/io.h>
These linux includes should be with the other ones.
+
+#include "57xx_hsi_bnx2fc.h"
+
+#include "bnx2fc_debug.h"
+#include "../../net/cnic_if.h"
+
+#include "fcoe_constants.h"
+
+#define BNX2FC_NAME "bnx2fc"
+#define BNX2FC_VERSION "1.0.0"
+
+#define PFX "bnx2fc: "
+
+#define BNX2FC_VLAN0FIX 1
Not used.
+
+#define BNX2X_DOORBELL_PCI_BAR 2
+
+#define BNX2FC_MAX_BD_LEN 0xffff
+#define BNX2FC_BD_SPLIT_SZ 0x8000
+#define BNX2FC_MAX_BDS_PER_CMD 256
+#define MAX_PAGES_PER_EXCHG_CTX_POOL 1024
+
+#define BNX2FC_SQ_WQES_MAX 256
+
+#define BNX2FC_SCSI_MAX_SQES ((3 * BNX2FC_SQ_WQES_MAX) / 8)
+#define BNX2FC_TM_MAX_SQES ((BNX2FC_SQ_WQES_MAX) / 2)
+#define BNX2FC_ELS_MAX_SQES (BNX2FC_TM_MAX_SQES - 1)
+
+#define BNX2FC_RQ_WQES_MAX 16
+#define BNX2FC_CQ_WQES_MAX (BNX2FC_SQ_WQES_MAX + BNX2FC_RQ_WQES_MAX)
+
+#define BNX2FC_MAX_SESS 2048
Not used.
+#define BNX2FC_NUM_MAX_SESS 128
What is the difference between this and BNX2FC_MAX_FCP_TGT below? Should
they be the same? Seems low if you are using multipath too.
+#define BNX2FC_NUM_MAX_SESS_LOG (ilog2(BNX2FC_NUM_MAX_SESS))
+
+#ifdef CONFIG_X86_64
+#define BNX2FC_MAX_OUTSTANDING_CMNDS 4096
+#else
+#define BNX2FC_MAX_OUTSTANDING_CMNDS 1024
+#endif
Why is this different for other archs?
+#define BNX2FC_MIN_PAYLOAD 256
+#define BNX2FC_MAX_PAYLOAD 2048
+
+#define BNX2FC_RQ_BUF_SZ 256
+#define BNX2FC_RQ_BUF_LOG_SZ (ilog2(BNX2FC_RQ_BUF_SZ))
+
+#define BNX2FC_SQ_WQE_SIZE (sizeof(struct fcoe_sqe))
+#define BNX2FC_CQ_WQE_SIZE (sizeof(struct fcoe_cqe))
+#define BNX2FC_RQ_WQE_SIZE (BNX2FC_RQ_BUF_SZ)
+#define BNX2FC_XFERQ_WQE_SIZE (sizeof(struct fcoe_xfrqe))
+#define BNX2FC_CONFQ_WQE_SIZE (sizeof(struct fcoe_confqe))
+#define BNX2FC_5771X_DB_PAGE_SIZE 128
+
+#define BNX2FC_MAX_TASKS BNX2FC_MAX_OUTSTANDING_CMNDS
+#define BNX2FC_TASK_SIZE 128
+/*#define BNX2FC_TASK_SIZE (sizeof(struct fcoe_task_ctx_entry)) */
+#define BNX2FC_TASKS_PER_PAGE (PAGE_SIZE/BNX2FC_TASK_SIZE)
+#define BNX2FC_TASK_CTX_ARR_SZ (BNX2FC_MAX_TASKS/BNX2FC_TASKS_PER_PAGE)
+
+#define BNX2FC_MAX_ROWS_IN_HASH_TBL 8
+#define BNX2FC_HASH_TBL_CHUNK_SIZE (16 * 1024)
+
+#define BNX2FC_MAX_SEQS 255
+
+#define SIMPLE_QUEUE 0x00
+#define HEAD_OF_QUEUE 0x01
+#define ORDERED_QUEUE 0x02
+#define ACA_QUEUE 0x04
these look like fc_fcp.h defs.
+#define UNTAGGED 0x05
+
+#define FCP_TMF_TGT_RESET 0x20
+
fc_fcp.h defs.
+#define FC_SRB_READ (1<< 1)
+#define FC_SRB_WRITE (1<< 0)
+
+#define BNX2FC_MIN_XID 0
+#define BNX2FC_MAX_XID (BNX2FC_MAX_OUTSTANDING_CMNDS - 1)
+#define FCOE_MIN_XID (BNX2FC_MAX_OUTSTANDING_CMNDS)
+#define FCOE_MAX_XID \
+ (BNX2FC_MAX_OUTSTANDING_CMNDS + (nr_cpu_ids * 256))
+#define BNX2FC_MAX_LUN 0xFFFF
Is this a hw limit?
For bnx2i it is only 512. Should one be fixed or does the fcoe function
support a higher value?
+#define BNX2FC_MAX_FCP_TGT 256
+#define BNX2FC_MAX_CMD_LEN 16
+#define BNX2FC_IOS_PER_WORK 24
Not used.
+#define IP_V4 0
+#define IP_V6 1
What are these for?
Could you go through the headers and removed unused stuff. I noted some
that had interesting names to me so I was looking at them, but there are
probably more.
_______________________________________________
devel mailing list
[email protected]
https://lists.open-fcoe.org/mailman/listinfo/devel
