>
> On Wed, May 04, 2011 at 05:48:42PM -0700, Yi Zou wrote:
> > commit 8a0427b "vlan: convert VLAN devices to use ndo_fix_features()"
> converts the
> > vlan to support ndo_fix_features. However, the wanted_features is not
> updated
> > for the vlan device, causing real_dev->features not be populated to the
> vlan
> > device when real_dev->features are changed by the driver through
> FEAT_CHANGE.
> > This is breaking FCoE related netdev feature flags on vlan devices. Add
> updating
> > wanted_features to vlan_transfer_features() so
> netdev_get_wanted_features() will
> > can get the updated wanted feature flags for vlan device properly.
>
> Can you describe the situation further? There might be problems if device
> changes its vlan_features after creation of VLAN devices on top
> (bonding?).
Not sure for bonding, I noticed this when creating FCoE instance on a vlan
Device on top of an Intel 82599 device. The real_dev is created with
vlan_features set of related FCoE flags, e.g., NETIF_F_FCOE_MTU,
NETIF_F_FCOE_CRC,
etc. However, the real_dev's features are not set w/ these FCoE flags till
the FCoE protocol stack starts using FCoE when ndo_fcoe_enable() is called,
where in the case of 82599's case, these flags are toggled on in netdev's
features, and netdev_features_change() is called to populate to the upper
vlan device since previously we do:
vlandev->features &= ~dev->vlan_features;
vlandev->features |= dev->features & dev->vlan_features;
in vlan_transfer_features(). FCoE only checks the corresponding netdev features
(vlan or real_dev) passed in from user space as a interface name e.g., eth2.100,
to tell if, for example, FCOE_MTU is supported. Particularly for this case,
there
is no change on vlan_features.
>
> dev->wanted_features is only what user wants to get and should not be
> changed
> by anything else.
Hmm...so my usage for that seems to be wrong if that's what wanted_features is
meant to be. Well, wanted_features in vlan is features & hw_features, if it
stays,
then, it seems to me will never get changes from real_dev's features since
netdev_get_wanted_features() won't get it to begin w/.
Also, note my RFC isn't complete either, as it only sets not clears previously
flags in wanted_features.
Thanks,
yi
>
> Best Regards,
> Michał Mirosław
_______________________________________________
devel mailing list
[email protected]
https://lists.open-fcoe.org/mailman/listinfo/devel
