Hi Vasu,
Thanks.
fcc.sh create-vn eth0.101 worked.
But I am unable to configure PTP mode still?
host9 Info:
Symbolic Name fcoe v0.1 over eth0.101
Port Name 20:00:00:1b:21:98:d3:59
Node Name 10:00:00:1b:21:98:d3:59
Port Type NPort (fabric via point-to-point)
Port State Online
Port ID 00:d3:59
Fabric Name 0
Max Frame Size 2112 bytes
Speed 10 Gbit
host10 Info:
Symbolic Name fcoe v0.1 over eth1.101
Port Name 20:00:00:1b:21:98:d3:58
Node Name 10:00:00:1b:21:98:d3:58
Port Type NPort (fabric via point-to-point)
Port State Online
Port ID 00:d3:58
Fabric Name 0
Max Frame Size 2112 bytes
Speed 10 Gbit
Regards,
Nirmal
On Thu, Mar 1, 2012 at 5:07 AM, Vasu Dev <vasu....@linux.intel.com> wrote:
> On Wed, 2012-02-29 at 17:11 +0530, nirmal r wrote:
> > Hi All,
> > I have a couple of configuration questions with respect to VN2VN.
> > 1) How do I configure PTP mode?
>
> Use VN2VN as you are doing in 2) below.
>
> > 2) I tried fcc.sh create-vn eth0 and vconfig add eth0 200. After
> capturing
> > the packets, I see they are untagged vn2vn packets.
> >
>
> Because you have created VN2VN on real interface not on vlan 200. So to
> have vlan tagged VN2VN do this on both end.
>
> vconfig add eth0 200
> ifconfig eth0.200 up
> fcc.sh create-vn eth0.200
>
>
> //Vasu
>
>
> > Please let me know, if I am doing something wrong.
> >
> > Regards,
> > Nirmal
> > _______________________________________________
> > devel mailing list
> > devel@open-fcoe.org
> > https://lists.open-fcoe.org/mailman/listinfo/devel
>
>
>
_______________________________________________
devel mailing list
devel@open-fcoe.org
https://lists.open-fcoe.org/mailman/listinfo/devel
