Hi Marcos,
thanks for the debugging - I will try to take a look over it in the next
day.
regards,
bogdan
Marcos Hack wrote:
Hi Bogdan,
Sorry, my fault. I believed that function force_rport() was of module
nathelper and I took off it of openser config.
I came back nathelper module, commented out just force_rport() function
and the problem don't occur.
I turned on debug=9 and see the following ( complete log in [1] ):
---
6(5032) qm_malloc(0x8146fc0, 7) called from msg_translator.c:
build_req_buf_from_sip_req(1340)
6(5032) qm_malloc(0x8146fc0, 8) returns address 0x817ea48 frag.
0x817ea30 (size=8) on 1 -th hit
6(5032) build_req_from_req: extra param added: <;rport>
---
Frag 0x817ea30 allocated here are not freed anywhere.
Well, I tried to find the error but after breaking everything I think
that I need your help! ;)
[1] http://vorigon.com/mhack/openser/20060721-0139/out.gz
Bogdan-Andrei Iancu escreveu:
Hi Marcos,
thanks for report. are you sure it is about the nathelper module? I ask
because this module does not use the build_req_buf_from_sip_req()
function. A fast search shows that the function is used only from two
places:
forward.c:322
modules/tm/t_fwd.c:173
It will be very helpful if you could post the entire log - from startup
- and not only the mem dumps; I can look where the chunks are allocated.
_______________________________________________
Devel mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/devel
