On 03/06/07 15:22, Norman Brandinger wrote:
> I was mistaken about the c-stye comments being supported.
>
> Just tested again and found that I should have stated: "c++ style"
> comments ('//') are not supported...
>
they were not supported, only # is to comment a line. Maybe you can add
it as feature request for future releases.
Cheers,
Daniel
> Regards,
> Norm
>
>
> Norman Brandinger wrote:
>
>> Haven't tested this recently, but I do remember a recent parse error
>> using "c-style" comments. Remove the '/* ... */' and see if your problem
>> goes away.
>>
>> If this is the case, I'm sorry about not posting it to the bug-tracker
>> earlier.
>>
>> Norm
>>
>>
>> Daniel-Constantin Mierla wrote:
>>
>>
>>> Hello,
>>>
>>> what revision of openser do you use? Try "svnversion -c" inside the
>>> source tree.
>>>
>>> It is very strange that it gets the error at the first line, which seems
>>> to be a comment...
>>>
>>> Cheers,
>>> Daniel
>>>
>>>
>>> On 03/06/07 08:59, sukerry wrote:
>>>
>>>
>>>
>>>> I found all the config files triger the same error!
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>> Hi,
>>>>> OpenSER print the error " 0(7139) parse error (1,1-3): syntax error"
>>>>> when it parse the config file below, I am very confused:
>>>>>
>>>>> #
>>>>> # $Id$
>>>>> #
>>>>> # simple quick-start config script
>>>>> #
>>>>>
>>>>> # ----------- global configuration parameters ------------------------
>>>>>
>>>>> /* Uncomment these lines to enter debugging mode */
>>>>> debug=7 # debug level (cmd line: -dddddddddd)
>>>>> fork=no
>>>>> log_stderror=yes
>>>>>
>>>>> check_via=no # (cmd. line: -v)
>>>>> dns=no # (cmd. line: -r)
>>>>> rev_dns=no # (cmd. line: -R)
>>>>> listen=udp:10.10.10.10:5060
>>>>> children=4
>>>>>
>>>>>
>>>>> #
>>>>> # uncomment the following lines for TLS support
>>>>> #disable_tls = 0
>>>>> #listen = tls:your_IP:5061
>>>>> #tls_verify_server = 1
>>>>> #tls_verify_client = 1
>>>>> #tls_require_client_certificate = 0
>>>>> #tls_method = TLSv1
>>>>> #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem"
>>>>> #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem"
>>>>> #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem"
>>>>>
>>>>> # ------------------ module loading ----------------------------------
>>>>> mpath="/usr/local/lib/openser/modules/"
>>>>>
>>>>> loadmodule "mysql.so"
>>>>> loadmodule "sl.so"
>>>>> loadmodule "maxfwd.so"
>>>>> loadmodule "textops.so"
>>>>> loadmodule "tm.so"
>>>>> loadmodule "rr.so"
>>>>> loadmodule "presence.so"
>>>>> loadmodule "avpops.so"
>>>>>
>>>>> loadmodule "usrloc.so"
>>>>> loadmodule "registrar.so"
>>>>> loadmodule "mi_fifo.so"
>>>>>
>>>>>
>>>>> # Uncomment this if you want digest authentication
>>>>> # mysql.so must be loaded !
>>>>> #loadmodule "/usr/local/lib/openser/modules/auth.so"
>>>>> #loadmodule "/usr/local/lib/openser/modules/auth_db.so"
>>>>>
>>>>> # ----------------- setting module-specific parameters ---------------
>>>>>
>>>>> # -- usrloc params --
>>>>> # Uncomment this if you want to use SQL database
>>>>> # for persistent storage and comment the previous line
>>>>> modparam("usrloc", "db_mode", 2)
>>>>>
>>>>> # -- auth params --
>>>>> # Uncomment if you are using auth module
>>>>> #
>>>>> #modparam("auth_db", "calculate_ha1", yes)
>>>>> #
>>>>> # If you set "calculate_ha1" parameter to yes (which true in this
>>>>> config),
>>>>> # uncomment also the following parameter)
>>>>> #
>>>>> #modparam("auth_db", "password_column", "password")
>>>>>
>>>>> # -- rr params --
>>>>> # add value to ;lr param to make some broken UAs happy
>>>>> modparam("rr", "enable_full_lr", 1)
>>>>>
>>>>> # -- presence params --
>>>>> modparam("presence|usrloc", "db_url",
>>>>> "mysql://openser:[EMAIL PROTECTED]/openser")
>>>>> modparam("presence", "max_expires", 3600)
>>>>> modparam("presence", "force_active", 1)
>>>>> modparam("presence", "server_address", "sip:10.10.10.10:5060" )
>>>>>
>>>>> # -- mi_fifo params --
>>>>> modparam("mi_fifo","fifo_name", "/tmp/openser_fifo")
>>>>>
>>>>> # ------------------------- request routing logic -------------------
>>>>>
>>>>> # main routing logic
>>>>>
>>>>> route{
>>>>> # initial sanity checks -- messages with
>>>>> # max_forwards==0, or excessively long requests
>>>>> if (!mf_process_maxfwd_header("10")) {
>>>>> sl_send_reply("483","Too Many Hops");
>>>>> exit;
>>>>> };
>>>>>
>>>>> if (msg:len >= 2048 ) {
>>>>> sl_send_reply("513", "Message too big");
>>>>> exit;
>>>>> };
>>>>>
>>>>> # we record-route all messages -- to make sure that
>>>>> # subsequent messages will go through our proxy; that's
>>>>> # particularly good if upstream and downstream entities
>>>>> # use different transport protocol
>>>>> if (!method=="REGISTER")
>>>>> record_route();
>>>>>
>>>>> # subsequent messages withing a dialog should take the
>>>>> # path determined by record-routing
>>>>> if (loose_route()) {
>>>>> # mark routing logic in request
>>>>> append_hf("P-hint: rr-enforced\r\n");
>>>>> route(1);
>>>>> };
>>>>>
>>>>> if (!uri==myself) {
>>>>> # mark routing logic in request
>>>>> append_hf("P-hint: outbound\r\n");
>>>>> # if you have some interdomain connections via TLS
>>>>> #if(uri=~"@tls_domain1.net") {
>>>>> # t_relay("tls:domain1.net");
>>>>> # exit;
>>>>> #} else if(uri=~"@tls_domain2.net") {
>>>>> # t_relay("tls:domain2.net");
>>>>> # exit;
>>>>> #}
>>>>> route(1);
>>>>> };
>>>>>
>>>>> # if the request is for other domain use UsrLoc
>>>>> # (in case, it does not work, use the following command
>>>>> # with proper names and addresses in it)
>>>>> if (uri==myself) {
>>>>>
>>>>> # presence handling
>>>>> if( is_method("PUBLISH|SUBSCRIBE"))
>>>>> route(2);
>>>>>
>>>>> if (method=="REGISTER") {
>>>>>
>>>>> # Uncomment this if you want to use digest
>>>>> authentication
>>>>> #if (!www_authorize("openser.org", "subscriber")) {
>>>>> # www_challenge("openser.org", "0");
>>>>> # exit;
>>>>> #};
>>>>>
>>>>> save("location");
>>>>> exit;
>>>>> };
>>>>>
>>>>> # native SIP destinations are handled using our USRLOC DB
>>>>> if (!lookup("location")) {
>>>>> sl_send_reply("404", "Not Found");
>>>>> exit;
>>>>> };
>>>>> append_hf("P-hint: usrloc applied\r\n");
>>>>> };
>>>>>
>>>>> route(1);
>>>>> }
>>>>>
>>>>>
>>>>> route[1] {
>>>>> # send it out now; use stateful forwarding as it works reliably
>>>>> # even for UDP2TCP
>>>>> if (!t_relay()) {
>>>>> sl_reply_error();
>>>>> };
>>>>> exit;
>>>>> }
>>>>>
>>>>> # presence handling route
>>>>> route[2]
>>>>> {
>>>>> # absorb retransmissions
>>>>> if (! t_newtran())
>>>>> {
>>>>> sl_reply_error();
>>>>> exit;
>>>>> };
>>>>>
>>>>> if(is_method("PUBLISH"))
>>>>> {
>>>>> handle_publish();
>>>>> t_release();
>>>>> } else if( is_method("SUBSCRIBE")) {
>>>>> handle_subscribe();
>>>>> t_release();
>>>>> };
>>>>>
>>>>> exit;
>>>>> }
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Devel mailing list
>>>>> Devel@openser.org
>>>>> http://openser.org/cgi-bin/mailman/listinfo/devel
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>> = = = = = = = = = = = = = = = = = = = =
>>>>
>>>>
>>>>
>>>>
>>>> sukerry
>>>> [EMAIL PROTECTED]
>>>> 2007-03-06
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>> _______________________________________________
>>>> Devel mailing list
>>>> Devel@openser.org
>>>> http://openser.org/cgi-bin/mailman/listinfo/devel
>>>>
>>>>
>>>>
>>>>
>>> _______________________________________________
>>> Devel mailing list
>>> Devel@openser.org
>>> http://openser.org/cgi-bin/mailman/listinfo/devel
>>>
>>>
>>>
>>>
>>>
>> _______________________________________________
>> Devel mailing list
>> Devel@openser.org
>> http://openser.org/cgi-bin/mailman/listinfo/devel
>>
>>
>>
>>
>
>
>
_______________________________________________
Devel mailing list
Devel@openser.org
http://openser.org/cgi-bin/mailman/listinfo/devel
