All, I am using latest engine and vdsm 4.20.23-1. I installed vdsm on centos7 vm and after the installation my vm stopped resolving names.
Here is my nic configuration before installation: TYPE="Ethernet" BOOTPROTO="dhcp" DEFROUTE="yes" PEERDNS="yes" PEERROUTES="yes" IPV4_FAILURE_FATAL="no" IPV6INIT="yes" IPV6_AUTOCONF="yes" IPV6_DEFROUTE="yes" IPV6_PEERDNS="yes" IPV6_PEERROUTES="yes" IPV6_FAILURE_FATAL="no" NAME="eth0" UUID="0079668a-8708-46ad-8dbf-da418ae6f77e" DEVICE="eth0" ONBOOT="yes" here is after: # Generated by VDSM version 4.20.23-1.el7.centos DEVICE=eth0 BRIDGE=ovirtmgmt ONBOOT=yes MTU=1500 DEFROUTE=no NM_CONTROLLED=no IPV6INIT=no and the bridge: # Generated by VDSM version 4.20.23-1.el7.centos DEVICE=ovirtmgmt TYPE=Bridge DELAY=0 STP=off ONBOOT=yes BOOTPROTO=dhcp MTU=1500 DEFROUTE=yes NM_CONTROLLED=no IPV6INIT=yes DHCPV6C=yes IPV6_AUTOCONF=no Thanks, Piotr _______________________________________________ Devel mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/devel
