On Wed, Jan 28, 2015 at 11:22 AM, Ichrak Amdouni <[email protected]> wrote:
> Hi Cenk, > > I don't know of you can run tests via the IoT-LAB portal, > Note: IoT-LAB is an open testbed, so anyone can subscribe and run tests on this platform ;) Best, Emmanuel I used the serial_aggregator ( > https://www.iot-lab.info/tutorials/nodes-serial-link-aggregation/) > in frontend to access serial traffic of M3 nodes, or simply netcat > port=20000. > (I have just shared the tutorial link) > > - at some nodes, after the 'init n', (and the 'init r' at the root), these > nodes do not respond to any command: > > m3-3;dodag (--> nothing) > m3-4;dodag > m3-5;dodag > > For another node which cannot join the dodag: > > m3-2;dodag > > 1421759565.108229;m3-2;> dodag > 1421759565.108229;m3-2;--------------------------- > 1421759565.109369;m3-2;Not part of a dodag > 1421759565.109369;m3-2;--------------------------- > > - I kept the default mode concerning the storage mode > - I run one experiment while specifying the routing table size (100 or 103 > I think), without specifying that it is the root node, > but no difference. > > Best, > Ichrak > > ------------------------------ > > *De: *"Cenk Gündoğan" <[email protected]> > *À: *"RIOT OS kernel developers" <[email protected]> > *Envoyé: *Mercredi 28 Janvier 2015 10:54:17 > *Objet: *Re: [riot-devel] RPL in RIOT > > Hello Ichrak, > > Thanks for the feedback! > I will try to look into this matter, I am currently at work though. > > Yesterday I tested the RPL-UDP example on native and on two msba2s and I > did not see any error. Unfortunately, I have no IoT-LAB hardware to do a > specific test on those ones. Maybe someone @University can have a look at > it, too. I will be at the university tomorrow and hopefully I can find > some IoT-LABs there. > > * Could you provide me with a backtrace of your `crashing` nodes? > * are you using the storing or nonstoring mode? > * do you specify the `routing entries size` explicitly at compile time? > > Best, > Cenk > > -------- Ursprüngliche Nachricht -------- > Von: Ichrak Amdouni <[email protected]> > Datum:28.01.2015 10:23 (GMT+01:00) > An: [email protected] > Cc: Oliver Hahm <[email protected]> > Betreff: [riot-devel] RPL in RIOT > > Dear all, > > I am trying to run the RPL example provided within RIOT repository > on IoT-LAB M3 nodes. The objective is to write a tutorial for RIOT and > IoT-LAB users. > I had discussions with Oleg, but I still have some problems. > > - some router nodes crash, sometimes after the 'init n' command. > - some nodes are not linked to the RPL tree, their dodag command returns > "No part of Dodag" > - 'Route' command returns empty at router nodes even if they are linked to > the tree. > > Any idea about the source of these troubles? > Thanks in advance. > > Ichrak > > > _______________________________________________ > devel mailing list > [email protected] > http://lists.riot-os.org/mailman/listinfo/devel > > > > _______________________________________________ > devel mailing list > [email protected] > http://lists.riot-os.org/mailman/listinfo/devel > >
_______________________________________________ devel mailing list [email protected] http://lists.riot-os.org/mailman/listinfo/devel
