Hi all, I followed this guide https://github.com/RIOT-OS/RIOT/wiki/Getting-started-with-STM32F%5B0%7C3%7C4%5Ddiscovery-boards to flash RIOT code onto a STM32F4DISCOVERY board. I get the following error:-
command: "BOARD=stm32f4discovery make flash" Compiling successfully. ### Flashing Target ### Open On-Chip Debugger 0.10.0-dev-00325-g12e4a2a (2016-07-12-10:00) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD adapter speed: 2000 kHz adapter_nsrst_delay: 100 none separate srst_only separate srst_nogate srst_open_drain connect_deassert_srst Info : Unable to match requested speed 2000 kHz, using 1800 kHz Info : Unable to match requested speed 2000 kHz, using 1800 kHz Info : clock speed 1800 kHz Error: open failed in procedure 'init' in procedure 'ocd_bouncer' Done flashing Any clue what could be causing this? /Adeel
_______________________________________________ devel mailing list [email protected] https://lists.riot-os.org/mailman/listinfo/devel
