Dear Thomas, Thanks for your response. I am using SAM3X8E (Integrated on the Arduino Due) with TI CC1101+CC1190 radio. By media I mean transfering images of 1MB size. Have you had any previous experience working with this radio under RIOT?
Thank you for your attention, Sincerely, América 2016-07-14 16:53 GMT-05:00 Thomas C. Schmidt <[email protected]>: > Dear America, > > can you clarify this question a bit: What platform, network stack, and > network technology do you use? What do you mean by 'media'? > > If you consider RIOT with the GENRC stack on an average constrained device > (iotlab-m3 IoT-Board), then an IP throughput of about 10 Mbit/s can be > achieved. If you add an 802.15.4 radio (e.g., Atmel AT86RF231) to the > transmission chain, then performance drops down to about 100 kbit/s, which > is somewhat natural. > > The conclusion from this: The RIOT GENRC stack is not a bottleneck in the > IoT regime, so 'media' transmission should be as good as Layer 2 allows. > > Best, > thomas > > > On 14.07.2016 23:32, América Ramírez R. wrote: > >> Dear Developers, >> >> Has anyone ever used RIOT-OS in order to transfer media? If so, please, >> would you comment about the throughput reached? >> >> Thank you for your time, >> >> Sincerely, >> >> America >> >> > -- > > Prof. Dr. Thomas C. Schmidt > ° Hamburg University of Applied Sciences Berliner Tor 7 ° > ° Dept. Informatik, Internet Technologies Group 20099 Hamburg, Germany ° > ° http://www.haw-hamburg.de/inet Fon: +49-40-42875-8452 > ° > ° http://www.informatik.haw-hamburg.de/~schmidt Fax: +49-40-42875-8409 > ° > _______________________________________________ > devel mailing list > [email protected] > https://lists.riot-os.org/mailman/listinfo/devel > -- América
_______________________________________________ devel mailing list [email protected] https://lists.riot-os.org/mailman/listinfo/devel
