Thank you all for your replies! @Ludwig I do wear glasses :) The problem is that I have a board based on samr21 but there is no edbg usb port, on the datasheet it mentions only reprogramming using a usb pen drive and a .bin file, I know nothing about the bootloader.
2016-10-07 15:45 GMT+02:00 Joakim Nohlgård <[email protected]>: > If you want a binary file which is an exact byte-for-byte copy of the > microcontroller ROM you can use objcopy to convert from ELF to raw binary. > The RIOT build system also produces a HEX file for flashing, which is a > plain-text variant of the raw binary. > > arm-none-eabi-objcopy -O binary myprog.elf myprog.bin > > You will not, however, need any of this manual handling for flashing the > supported boards, `make flash` is all you need. > > Best regards, > Joakim > > On Fri, Oct 7, 2016 at 3:35 PM, Oleg Hahm <[email protected]> wrote: > >> Hi Ilias! >> >> On Fri, Oct 07, 2016 at 03:29:38PM +0200, Ilias Seitanidis wrote: >> > Is it possible to create a bin file, which includes everything and then >> > flash the .bin file >> > on the board? (From what I've seen RIOT OS doesn't support this, >> right????) >> >> What exactly do you mean by ".bin" file? By default RIOT produces an ELF >> [1] file >> for most platforms that contain the full binary that is flashed onto the >> device. >> >> Cheers, >> Oleg >> >> [1] https://en.wikipedia.org/wiki/Executable_and_Linkable_Format >> -- >> Chuck Norris doesn't do TCP handshake - he does TCP roundhouse-kick to >> initiate >> the connection. >> >> _______________________________________________ >> devel mailing list >> [email protected] >> https://lists.riot-os.org/mailman/listinfo/devel >> >> > > _______________________________________________ > devel mailing list > [email protected] > https://lists.riot-os.org/mailman/listinfo/devel > >
_______________________________________________ devel mailing list [email protected] https://lists.riot-os.org/mailman/listinfo/devel
