Hi Tomek, please have a look at these guides [1], they should get you started with the RPi + Openlabs.
In case anything is missing or unclear, please make open issue there. best, Sebastian [1]: https://github.com/riot-makers/wpan-raspbian/wiki > Am 09.12.2016 um 07:01 schrieb Tomek Jokii <[email protected]>: > > Hi, > > does someone plan to update following HowTo: > > https://github.com/RIOT-OS/RIOT/wiki/How-to-install-6LoWPAN-Linux-Kernel-on-Raspberry-Pi > > > I have all is needed: > • OpenLabs Raspberry Pi 802.15.4 radio > • Raspberry Pi 2 or Raspberry Pi 3 > • Atmel SAM R21 Xplained Pro > but still fail to do successful ping. Two SAM R21 boards see each other, can > ping, setup UDP server etc., but going according HowTo gives no effect. > No ping response both from raspberry nor from SAM R21. I managed go through > all steps up to examples. > Recently I'm using new raspberry kernel which support openlabs radio by > default (just need to enable overlays), but still not working. > > Maybe there is some other up to date howto/tutorial which enable SAM R21 > board and RPI to communicate. > Finally I'm new to RIOT, is this right place to ask that question? > > Thanks, > Tomek > _______________________________________________ > devel mailing list > [email protected] > https://lists.riot-os.org/mailman/listinfo/devel _______________________________________________ devel mailing list [email protected] https://lists.riot-os.org/mailman/listinfo/devel
