Hi Brenton, Are you trying to use a bootstrapping server as well as the a normal one? Are you testing this on native or on a board? I assume your server is listening on port 5683 right?
What I usually do for testing is: - Run the local Leshan server - Use the tapsetup script to create the interfaces - Check the local IP for tapbr0 and use it as server URI - Compile and run the RIOT node You should see the CoAP message of the node registering to the server. Please tell me if that works. Cheers, Leandro. On Fri, 2019-04-12 at 16:23 +0200, Brenton Chetty wrote: > Hi > > I've had a look at the implementation pointed out by José. I cannot > get the Leshan server to register the client though. The client gets > stuck with output > -> State: STATE_REGISTERING > I think the IP addresses or possibly some bootstrapping procedure > might be the problem. I changed the IP address in the makefile to > [::1]. Wireshark shows a packet being sent to port 53 over UDP. > Should this not be all the client information sent to port 5683 using > CoAP? What am I doing wrong? > > Regards > Brenton > > On Wed, Apr 10, 2019 at 9:06 PM Leandro Lanzieri < > leandro.lanzi...@haw-hamburg.de> wrote: > > Hi Brenton, > > > > As José pointed out, that PR only implements some basic objects. To > > perform the update the device should expose a "Firmware Update > > Object" > > [2]. > > > > In the Wakaama repo there is an example of a basic structure for > > that > > object [3]. Take a look of how I added the Light Control object to > > have > > an idea on how the package can be extended with new objects, and > > how to > > instantiate them. The example application should work. > > > > As Ken mentioned any comments or improvements on the PR are very > > welcome. > > > > Cheers, > > Leandro. > > > > [2]: > > http://www.openmobilealliance.org/tech/profiles/LWM2M_Firmware_Update-v1_0_2.xml > > > > [3]: > > https://github.com/eclipse/wakaama/blob/master/examples/client/object_firmware.c > > > > On Wed, 2019-04-10 at 14:50 +0100, Ken Bannister wrote: > > > Thanks, José. I have been reviewing the PR, and I agree it > > definitely > > > is > > > usable. I think Leandro has addressed everything to this point. > > > > > > Brenton, as you can see on the PR, you should be able to build > > and > > > run > > > the example. Please add your comments on that PR as well. > > > > > > Thanks, > > > Ken > > > > > > On 4/10/19 2:34 PM, José Alamos wrote: > > > > Hello Brenton, > > > > > > > > There's an open PR with a basic LWM2M Wakaama client for RIOT > > here > > > > [1]. > > > > You can maybe give it a look. > > > > > > > > Does this solve your issue? > > > > > > > > Cheers, > > > > José > > > > > > > > [1]: https://github.com/RIOT-OS/RIOT/pull/11036 > > > > > > > > On Wed, 2019-04-10 at 15:11 +0200, Brenton Chetty wrote: > > > > > Hey guys, sorry to worry you'll. I just graduated, and I'm an > > > > > intern. > > > > > I need to update a STM32 device over the air using a Leshan > > > > > Server, > > > > > and a Wakaama Client (RIOT). I managed to send a .bin file > > from > > > > > the > > > > > Server to the RIOT_Wakaama client using the Linux native > > > > > interface. I > > > > > used the 2015 RIOT_Wakaama client example created by Robby14 > > > > > (Github), as i do not know how to use the Wakaama pkg in the > > RIOT > > > > > base. Any ideas on how i should proceed with this task? How > > do I > > > > > use > > > > > the wakaama pkg? Any advice would be greatly appreciated! > > > > > > > > > > With thanks > > > > > Brenton > > > > > _______________________________________________ > > > > > devel mailing list > > > > > devel@riot-os.org > > > > > https://lists.riot-os.org/mailman/listinfo/devel > > > > > > > > _______________________________________________ > > > > devel mailing list > > > > devel@riot-os.org > > > > https://lists.riot-os.org/mailman/listinfo/devel > > > > > > _______________________________________________ > > > devel mailing list > > > devel@riot-os.org > > > https://lists.riot-os.org/mailman/listinfo/devel > > _______________________________________________ > > devel mailing list > > devel@riot-os.org > > https://lists.riot-os.org/mailman/listinfo/devel -- Leandro Lanzieri Rodriguez Hamburg University of Applied Sciences Berliner Tor 7, 20099 Hamburg, Germany, Room 4.81c Dept. Computer Science, Internet Technologies Group http://inet.haw-hamburg.de/members/leandro-lanzieri Phone: +49 40 42875 - 8426 _______________________________________________ devel mailing list devel@riot-os.org https://lists.riot-os.org/mailman/listinfo/devel
