Hi, There's the TESTRUNNER_CONNECT_DELAY environnement variable that can be set for this purpose from the board Makefile.include file. This is normally used for any samd21 based board with an Arduino bootloader. Maybe increase the TERM_DELAY variable from the command line or in the Makefile.include here [1].
Alex [1] https://github.com/RIOT-OS/RIOT/blob/master/boards/common/samd21-arduino-bootloader/Makefile.include#L27 ----- Le 27 Mai 20, à 21:31, Kees Bakker k...@ijzerbout.nl a écrit : > Alexandre, do you have a suggestion? > Anyone? > > On 26-05-2020 21:59, Kees Bakker wrote: >> Hi, >> >> My setup is more or less correct. When I do >> $ BOARD=sodaq-sara-sff make -C tests/evtimer_msg flash term >> ... >> 2020-05-26 21:50:39,186 # Are the reception times of all 4 msgs close to >> the supposed values? >> 2020-05-26 21:50:39,187 # At 2361 ms received msg 0: "#2 supposed to >> be 2361" >> 2020-05-26 21:50:39,187 # At 2702 ms received msg 1: "#0 supposed to >> be 2701" >> 2020-05-26 21:50:39,670 # At 3202 ms received msg 2: "#1 supposed to >> be 3202" >> 2020-05-26 21:50:42,116 # At 5656 ms received msg 3: "#3 supposed to >> be 5656" >> 2020-05-26 21:50:42,127 # By now all msgs should have been received >> 2020-05-26 21:50:42,127 # If yes, the tests were successful >> >> It connects nicely to the /dev/ttyACM0 with all the expected >> output. >> >> However, when I make the "test" target it fails to find /dev/ttyACM0 >> >> $ BOARD=sodaq-sara-sff make RIOT_CI_BUILD=1 CC_NOCOLOR=1 >> --no-print-directory -C /home/kees/src/RIOT/tests/evtimer_msg test >> r >> /home/kees/src/RIOT/dist/tools/pyterm/pyterm -p "/dev/ttyACM0" -b >> "115200" --no-reconnect --noprefix --no-repeat-command-on-empty-line >> Connect to serial port /dev/ttyACM0 >> could not open port /dev/ttyACM0: [Errno 2] No such file or directory: >> '/dev/ttyACM0' >> make[1]: *** [/home/kees/src/RIOT/Makefile.include:726: cleanterm] Error 2 >> Traceback (most recent call last): >> File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 166, >> in read_nonblocking >> s = os.read(self.child_fd, size) >> OSError: [Errno 5] Input/output error >> >> In fact, I'm trying to run compile_and_test_for_board.py, but that fails >> on the "make test" command. >> >> Is there a timeout value somewhere that needs to be increased? > > _______________________________________________ > devel mailing list > devel@riot-os.org > https://lists.riot-os.org/mailman/listinfo/devel _______________________________________________ devel mailing list devel@riot-os.org https://lists.riot-os.org/mailman/listinfo/devel
