Hi Akshay,

I’ve been able to run at the examples/default application, and get some output 
on the terminal: 
https://github.com/RIOT-OS/RIOT/pull/14367#issuecomment-655148512 
<https://github.com/RIOT-OS/RIOT/pull/14367#issuecomment-655148512>.

The code (but in very rough shape!) can be found here: 
https://github.com/basilfx/RIOT/tree/feature/sltb010a 
<https://github.com/basilfx/RIOT/tree/feature/sltb010a>.

So far, only UART (but not EUART) and GPIO work. RTT/RTC need a new driver. I2C 
and Timers do compile, but don’t work yet.

Kind regards,
Bas

> Op 7 jul. 2020, om 09:23 heeft Bas Stottelaar <basstottel...@gmail.com> het 
> volgende geschreven:
> 
> Hi Aksay,
> 
> I am still working on this, but I had some other things to do that took more 
> time ;-)
> 
> The PR for Cortex-M33 support is here: 
> https://github.com/RIOT-OS/RIOT/pull/14367 
> <https://github.com/RIOT-OS/RIOT/pull/14367>. Support for the board will 
> follow if I can get it to work.
> 
> Kind regards,
> 
> Bas Stottelaar
> 
> 
> 
> Op ma 6 jul. 2020 om 17:07 schreef Akshay Mishra <aks...@dspworks.in 
> <mailto:aks...@dspworks.in>>:
> Hello Bas,
> 
> Could you get the Cortex-M33 supported?
> 
> 
> On Thu, 25 Jun, 2020, 11:47 Akshay Mishra, <aks...@dspworks.in 
> <mailto:aks...@dspworks.in>> wrote:
> Thanks Bas - I can also spend some time once you give me a starting point. 
> 
> Regards,
> Akshay
> 
> On Thu, Jun 25, 2020 at 11:40 AM Bas Stottelaar <basstottel...@gmail.com 
> <mailto:basstottel...@gmail.com>> wrote:
> Hi Akshay,
> 
> I received the SLTB010A yesterday and have already prepared all vendor files.
> 
> Support for Cortex-M33 isn't there yet, but I hope it's straightforward (it's 
> basically a successor of the M4 according to the Silabs docs). I also need to 
> update the EFM32 device drivers in RIOT-OS to support the series 2 
> microcontrollers. According to AN0918.2 
> <https://www.silabs.com/documents/public/application-notes/an0918.2-efm32-to-efr32xg2x-migration-guide.pdf>,
>  it should be quite easy as long as we're using EMLIB (which we do). Gecko 
> SDK was already updated to support the series 2 microcontrollers.
> 
> It's a bit more work than I thought, but I hope to have a first version that 
> works this weekend.
> 
> Kind regards,
> 
> Bas Stottelaar
> 
> 
> 
> Op za 20 jun. 2020 om 23:59 schreef Akshay Mishra <aks...@dspworks.in 
> <mailto:aks...@dspworks.in>>:
> Thanks Bas. That's a Cortex-M33 chip. I believe there isn't any CM33 as yet 
> on RIOT otherwise. 
> 
> Warm regards,
> Akshay
> 
> On Sun, 21 Jun, 2020, 03:10 Bas Stottelaar, <basstottel...@gmail.com 
> <mailto:basstottel...@gmail.com>> wrote:
> I just ordered that board. I think I can make an initial PR this week.
> 
> Kind regards
> Bas
> 
>> Op 20 jun. 2020 om 23:30 heeft Akshay Mishra <aks...@dspworks.in 
>> <mailto:aks...@dspworks.in>> het volgende geschreven:
>> 
>> 
>> Hello Bas,
>> 
>>  Yes SLTB010A is indeed the board I plan to use
>> 
>> Thank You,
>> Akshay
>> 
>> 
>> On Sun, 21 Jun, 2020, 02:03 Bas Stottelaar, <basstottel...@gmail.com 
>> <mailto:basstottel...@gmail.com>> wrote:
>> Hi Akshay,
>> 
>> The EFM32 and EFR32 family are supported, but it depends on the board 
>> definitions.
>> 
>> Are you using the SLTB010A board? I see that that one is using the 
>> EFR32BGxx. If so, I can start a PR to add support for it.
>> 
>> Kind regards,
>> Bas Stottelaar
>> 
>>> Op 20 jun. 2020, om 19:46 heeft Akshay Mishra <akshaymis...@gmail.com 
>>> <mailto:akshaymis...@gmail.com>> het volgende geschreven:
>>> 
>>> Hello RIOTers,
>>>                 I have been a very long time lurker here with some porting 
>>> and development but mostly using what's been done. I am looking at BG22 
>>> from Silabs and wanted to inquire if there has been any initiation towards 
>>> this family (EFR32BGxx).
>>> 
>>> Intent is to have RIOT and then nimble integrated on this.
>>> 
>>> thank you,
>>> Akshay
>>> 
>>> _______________________________________________
>>> devel mailing list
>>> devel@riot-os.org <mailto:devel@riot-os.org>
>>> https://lists.riot-os.org/mailman/listinfo/devel 
>>> <https://lists.riot-os.org/mailman/listinfo/devel>
>> 
>> _______________________________________________
>> devel mailing list
>> devel@riot-os.org <mailto:devel@riot-os.org>
>> https://lists.riot-os.org/mailman/listinfo/devel 
>> <https://lists.riot-os.org/mailman/listinfo/devel>
>> _______________________________________________
>> devel mailing list
>> devel@riot-os.org <mailto:devel@riot-os.org>
>> https://lists.riot-os.org/mailman/listinfo/devel 
>> <https://lists.riot-os.org/mailman/listinfo/devel>
> _______________________________________________
> devel mailing list
> devel@riot-os.org <mailto:devel@riot-os.org>
> https://lists.riot-os.org/mailman/listinfo/devel 
> <https://lists.riot-os.org/mailman/listinfo/devel>
> _______________________________________________
> devel mailing list
> devel@riot-os.org <mailto:devel@riot-os.org>
> https://lists.riot-os.org/mailman/listinfo/devel 
> <https://lists.riot-os.org/mailman/listinfo/devel>
> _______________________________________________
> devel mailing list
> devel@riot-os.org <mailto:devel@riot-os.org>
> https://lists.riot-os.org/mailman/listinfo/devel 
> <https://lists.riot-os.org/mailman/listinfo/devel>
> 
> 
> -- 
> Akshay Mishra
> Chief Technology Officer
> 
> GSM: +91 98693 21611
> Skype: mishrakshay
> Office: +91 22 2500 3488
> _______________________________________________
> devel mailing list
> devel@riot-os.org <mailto:devel@riot-os.org>
> https://lists.riot-os.org/mailman/listinfo/devel 
> <https://lists.riot-os.org/mailman/listinfo/devel>

_______________________________________________
devel mailing list
devel@riot-os.org
https://lists.riot-os.org/mailman/listinfo/devel

Reply via email to