Hey Leandro,
that looks very helpful indeed - thanks a lot!
Unfortunately, I still get no response from the modem - but the Arduino
example isn't working either, so maybe it's a problem with the hardware.
Cheers
Oleg
On 2020-08-25 15:20, Leandro Lanzieri wrote:
Hi Oleg,
I started a driver for the Ublox device on this branch [1]. It is
limited but it is working on the SODAQ SARA AFF board. I don't know if
the pins change on the SFF version of the board, but you can give it a
try. Hope that helps.
Cheers,
Leandro.
[1]: https://github.com/leandrolanzieri/RIOT/tree/pr/drivers/sara_r410m
On Tue, 2020-08-25 at 15:09 +0200, Oleg Hahm wrote:
Hey folks,
I'm currently trying to get RIOT to fly on the SODAQ SARA SFF board.
Unfortunately I'm struggling a little bit with the startup sequence
of the
U-Blox module. According to the documentation here:
http://doc.riot-os.org/sodaq-sara-sff_2include_2board_8h.html and the
Arduino
samples provided by SODAQ I assumed that I would need to call
SARA_ENABLE_ON
and SARA_TX_ENABLE_ON, followed by toggling SARA_R4XX_PWR_ON_PIN, but
I still
fail to read the firmware via an AT command. Anyone with experience
with the
SODAQ boards and the SARA U-Blox module?
Cheers
Oleg
_______________________________________________
devel mailing list
devel@riot-os.org
https://lists.riot-os.org/mailman/listinfo/devel
_______________________________________________
devel mailing list
devel@riot-os.org
https://lists.riot-os.org/mailman/listinfo/devel
