Hi, As far as I know, the raspberry Pi binaries will not run on the arm GDB sim. There may be a suitable QEMU based Raspberry Pi simulator. That would be a good option to try.
Alan On Wed, Mar 11, 2015 at 9:42 PM, QIAO YANG <yangqiao0...@me.com> wrote: > Hello , > > I was wondering if the raspberry pi samples can run on arm-rtems4.11-gdb. > I thought I had done the compilations correctly according to Mr Alan's > blog, but it just stand still when running the sample in the simulator. > > I'm not sure if it's my problem or it can only run on a real rpi board. > If it's my own problem I'll double check what I've done, if not I've got to > wait until next week to post my hello demo when the cable arrives. > > here's the output of gdb: > > Reading symbols from > ./arm-rtems4.11/c/raspberrypi/testsuites/samples/hello/hello.exe...done. > (gdb) tar sim > Connected to the simulator. > (gdb) load > Loading section .start, size 0x340 vma 0x8000 > Loading section .text, size 0x17920 vma 0x8340 > Loading section .init, size 0x18 vma 0x1fc60 > Loading section .fini, size 0x18 vma 0x1fc78 > Loading section .rodata, size 0xc30 vma 0x100000 > Loading section .ARM.exidx, size 0x8 vma 0x100c30 > Loading section .eh_frame, size 0x48 vma 0x100c38 > Loading section .init_array, size 0x4 vma 0x100c80 > Loading section .fini_array, size 0x4 vma 0x100c84 > Loading section .jcr, size 0x4 vma 0x100c88 > Loading section .data, size 0x5e8 vma 0x100c90 > Start address 0x8040 > Transfer rate: 817184 bits in <1 sec. > (gdb) r > Starting program: > /home/yangqiao/development/rtems/build-rtems-rpi/arm-rtems4.11/c/raspberrypi/testsuites/samples/hello/hello.exe > > Best regards, >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel