Looks like 1/5 got stuck.
On Sat, May 21, 2016 at 6:54 AM, <ppisa4li...@pikron.com> wrote: > From: Pavel Pisa <pp...@pikron.com> > > The series updates and cleans YANG Qiao GSoC 2015 work for actual > RTEMS 4.12 development version. > > The changes require that VideoCore firmware is running even > if video output is not used because mailbox based communication > with VideoCore is used to obtain SD command line parameters > passed to the RTEMS application image and to limit RTEMS RAM > workarea to not go beyond VideoCore assigned memory start. > > The two options configurable by "cmdline.txt" file read > and made accessible by VideoCore firmware are present > > --video= > possible values > auto - select mode automatically according to the connected monitor > off (or none) - disable video support > width x height with optional bpp - for example 800x600 or 800x600-32 > > --console= > fbcons - redirect RTEMS console output to the connected monitor > if --video= is not specified/enabled or monitor is not detected > then output stays to be connected to the UART > > Typical "cmdline.txt" content for testing > > --video=auto --console=fbcons > > WARNING: the used VideoCore service for command line arguments retrieval > returns only these arguments setup in "cmdline.txt". > Arguments provided to U-boot or other loader are ignored. > > Code has been tested or Raspberry Pi 1 with U-boot + TFTP and with direct > boot from SD card with and without monitor connected. > > Pavel Pisa (2): > arm/raspberrypi: cmdline enhancement and early access workaround. > arm/raspberrypi: move MMU in front of application image to respect > variable memory size. > > YANG Qiao (3): > arm/raspberrypi: add VideoCore framebuffer without initialization > arm/raspberrypi: add video outchar support for rpi bsp > arm/raspberrypi: add fbcons support for rpi bsp > > c/src/lib/libbsp/arm/raspberrypi/Makefile.am | 13 +- > .../arm/raspberrypi/console/console-config.c | 12 +- > .../arm/raspberrypi/console/console_select.c | 114 + > c/src/lib/libbsp/arm/raspberrypi/console/fb.c | 385 ++ > c/src/lib/libbsp/arm/raspberrypi/console/fbcons.c | 184 + > c/src/lib/libbsp/arm/raspberrypi/console/fbcons.h | 47 + > .../lib/libbsp/arm/raspberrypi/console/font_data.h | 4639 > ++++++++++++++++++++ > c/src/lib/libbsp/arm/raspberrypi/console/outch.c | 411 ++ > c/src/lib/libbsp/arm/raspberrypi/include/bsp.h | 9 + > c/src/lib/libbsp/arm/raspberrypi/include/rpi-fb.h | 53 + > c/src/lib/libbsp/arm/raspberrypi/preinstall.am | 8 + > .../arm/raspberrypi/startup/bspgetworkarea.c | 74 + > .../libbsp/arm/raspberrypi/startup/bspstarthooks.c | 4 + > c/src/lib/libbsp/arm/raspberrypi/startup/cmdline.c | 12 +- > c/src/lib/libbsp/arm/raspberrypi/startup/linkcmds | 6 +- > c/src/lib/libbsp/arm/raspberrypi/startup/mminit.c | 31 + > 16 files changed, 5991 insertions(+), 11 deletions(-) > create mode 100644 c/src/lib/libbsp/arm/raspberrypi/console/console_select.c > create mode 100644 c/src/lib/libbsp/arm/raspberrypi/console/fb.c > create mode 100644 c/src/lib/libbsp/arm/raspberrypi/console/fbcons.c > create mode 100644 c/src/lib/libbsp/arm/raspberrypi/console/fbcons.h > create mode 100644 c/src/lib/libbsp/arm/raspberrypi/console/font_data.h > create mode 100644 c/src/lib/libbsp/arm/raspberrypi/console/outch.c > create mode 100644 c/src/lib/libbsp/arm/raspberrypi/include/rpi-fb.h > create mode 100644 c/src/lib/libbsp/arm/raspberrypi/startup/bspgetworkarea.c > create mode 100644 c/src/lib/libbsp/arm/raspberrypi/startup/mminit.c > > -- > 1.9.1 > _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
