On 8/2/20 11:13 am, Amar Takhar wrote: > I was going to start with the Beaglebone and do TFTP to load the tests.
I suggest you start with getting rtems-run to run any of the built tests. You will need ... 1. An SD card image with u-boot configured to TFTP netboot. The rtems-boot-image tool can make this. You u-boot for the BBB. 2. The TFTP proxy tool running. This avoids all the tests and rtems-test having to be on the same host plus with some changes rtems-test could run parallel jobs on real hardware (currently not a priority for me to work on). 3. Serial console connections using ser2net. I have a RPi on a USB hub with a quick power port that can run the RPi and all my consoles. > I do > have a board design using p-channel mosfets to be able to disconnect the > power > to each board out of band to handle hard locks. That's why I went with a > custom > power supply. Wish I had the 5-10k for the digital switchable power supplies > I'm used to using. :) I got a cheap one but they still cost. Sorting out the power control can be once you can run an executable. Chris _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel