On Sun, Mar 8, 2020 at 3:07 PM Christian Mauderer <[email protected]> wrote: > > Hello John, > > On 08/03/2020 18:32, John kongtcheu wrote: > > Thank you for the information. I have already done the hello world > > project, (I just forwarded it to you to take a look) and I took a break > > for a little bit, because of school work. > > sorry, I missed that mail. Did Gedare or Joel respond to it? Can you > please add your name to the list here: > > https://devel.rtems.org/wiki/GSoC/2020 > > > Regarding, working on > > peripherals I was wondering if there any spots on working on GPIO work > > and ADC conversion as those are also two jobs I would be greatly > > interested in. > > There are really few peripherals left on BBB. Someone already added a > GPIO driver some time back. I don't think anything has been done > regarding ADC. But on the other hand we don't really have an abstraction > layer for that in RTEMS. Depending on what you plan to add it can be > anything from not useful at all to a nice part of a project. But you > have to create some convincing suggestion ;-) > I responded on the other thread, but to repeat myself, I think networking stacks or "exotic" but useful peripheral support (CAN bus came to mind) could be good BBB projects. And to do a BBB project requires to have the BBB and able to run RTEMS on it. So we need that proof in addition to the normal sparc/sis one.
> > Also thank you again for your advice on the USB-OTG work > > and I will also do my research regarding that topic. > > No problem. Don't hesitate to ask if you are stuck somewhere. > > Best regards > > Christian > > > > > On Sun, Mar 8, 2020 at 12:53 PM Christian Mauderer <[email protected] > > <mailto:[email protected]>> wrote: > > > > On 08/03/2020 15:58, John kongtcheu wrote: > > > Dear Dev Mailing list, > > > I'm interested in work regarding peripherals and it seems like working > > > on the beaglebone black projects would be something I would be be good > > > at. I have experience working in embedded systems before, and I > > have my > > > own BBB. I was curious if there was anyone willing to mentor for this > > > project or if this project is a good idea at all. > > > Thank you, > > > > Hello John, > > > > welcome to RTEMS. Please note that we require students to send in some > > proof that they can build and run RTEMS on the hardware for the project. > > See the GSoC Getting Started guide in the wiki. > > > > Regarding your suggested project: I would love to see the USB-OTG > > support working. But note that we already have a proposal to extend the > > FDT support in BBB. And I'm not sure whether USB-OTG is really enough > > for a whole GSoC. > > > > Adding the USB-OTG support will be mostly a libbsd project and won't be > > too peripheral oriented. It is more a question about how to analyze how > > to set up an OTG device in FreeBSD and find out how that can be > > implemented in RTEMS using libbsd. > > > > Maybe you want to start by taking a short look at FreeBSD and how to set > > up a USB-OTG device there. Depending on that there might could be topics > > that are similar that would be a good match for the project. For example > > if it is done via rc.conf: I think there are quite some other stuff that > > could be added to rc.conf too (e.g. WLAN support; see Trac ticket > > #3222). > > > > Best regards > > > > Christian > > > _______________________________________________ > devel mailing list > [email protected] > http://lists.rtems.org/mailman/listinfo/devel _______________________________________________ devel mailing list [email protected] http://lists.rtems.org/mailman/listinfo/devel
