On Fri, Jul 3, 2020 at 12:10 AM Vijay Kumar Banerjee <vi...@rtems.org> wrote:
> On Fri, Jul 3, 2020 at 12:00 AM Mritunjay Sharma > <mritunjaysharma...@gmail.com> wrote: > > > > I guess the problem can be with my using 'sudo' here > > but without using sudo and directly using 'make install', > > the process stops all the more early with the following error: > > > > Please try `sudo chmod +x $HOME/development/rtems_dev/rtems-4.10.2/` > Thank you so much, I tried this but again got the earlier error. > > > "Making install in make > > make[1]: Entering directory > '/home/mritunjay/development/rtems_dev/rtems-4.10.2/pc-386/make' > > make[2]: Entering directory > '/home/mritunjay/development/rtems_dev/rtems-4.10.2/pc-386/make' > > make[2]: Nothing to be done for 'install-exec-am'. > > /bin/mkdir -p '/home/development/rtems_dev/rtems-4.10.2/make' > > /usr/bin/install -c -m 644 ../../make/main.cfg ../../make/leaf.cfg > '/home/development/rtems_dev/rtems-4.10.2/make' > > /usr/bin/install: cannot remove > '/home/development/rtems_dev/rtems-4.10.2/make/main.cfg': Permission denied > > /usr/bin/install: cannot remove > '/home/development/rtems_dev/rtems-4.10.2/make/leaf.cfg': Permission denied > > Makefile:265: recipe for target 'install-dist_rtems_makeDATA' failed > > make[2]: *** [install-dist_rtems_makeDATA] Error 1 > > make[2]: Leaving directory > '/home/mritunjay/development/rtems_dev/rtems-4.10.2/pc-386/make' > > Makefile:379: recipe for target 'install-am' failed > > make[1]: *** [install-am] Error 2 > > make[1]: Leaving directory > '/home/mritunjay/development/rtems_dev/rtems-4.10.2/pc-386/make' > > Makefile:304: recipe for target 'install-recursive' failed > > make: *** [install-recursive] Error 1" > > > > > > On Thu, Jul 2, 2020 at 11:47 PM Mritunjay Sharma < > mritunjaysharma...@gmail.com> wrote: > >> > >> Hello Heinz and everyone, > >> > >> Thank you so much, using RTEMS RSB for 4.10 really helped me a lot and > saved a lot of time. > >> Though in all this it was a good learning experience for how to build > the compiler > >> tools manually too :-) > >> > >> The make was successful this time and the previous error was resolved > but after the make while using 'sudo make install', I have got another > error as following: > >> " ...( cd > '/home/development/rtems_dev/rtems-4.10.2/i386-rtems4.10/pc386/lib' && > i386-rtems4.10-ranlib libsapi.a ) > >> /bin/bash: line 5: i386-rtems4.10-ranlib: command not found > >> Makefile:366: recipe for target 'install-project_libLIBRARIES' failed > >> make[5]: *** [install-project_libLIBRARIES] Error 127 > >> make[5]: Leaving directory > '/home/mritunjay/development/rtems_dev/rtems-4.10.2/pc-386/i386-rtems4.10/c/pc386/cpukit/sapi' > >> Makefile:952: recipe for target 'install-am' failed > >> make[4]: *** [install-am] Error 2 > >> make[4]: Leaving directory > '/home/mritunjay/development/rtems_dev/rtems-4.10.2/pc-386/i386-rtems4.10/c/pc386/cpukit/sapi' > >> Makefile:785: recipe for target 'install-recursive' failed > >> make[3]: *** [install-recursive] Error 1 > >> make[3]: Leaving directory > '/home/mritunjay/development/rtems_dev/rtems-4.10.2/pc-386/i386-rtems4.10/c/pc386/cpukit' > >> Makefile:425: recipe for target 'install-recursive' failed > >> make[2]: *** [install-recursive] Error 1 > >> make[2]: Leaving directory > '/home/mritunjay/development/rtems_dev/rtems-4.10.2/pc-386/i386-rtems4.10/c/pc386' > >> Makefile:286: recipe for target 'install-recursive' failed > >> make[1]: *** [install-recursive] Error 1 > >> make[1]: Leaving directory > '/home/mritunjay/development/rtems_dev/rtems-4.10.2/pc-386/i386-rtems4.10/c' > >> Makefile:304: recipe for target 'install-recursive' failed > >> make: *** [install-recursive] Error 1" > >> > >> I am trying to figure out on what can be the reason behind this, it > will be kind of > >> you all to guide help this fix. > >> > >> Thanks, > >> Mritunjay > >> > >> > >> > >> > >> On Thu, Jul 2, 2020 at 9:59 AM Heinz Junkes <jun...@fhi-berlin.mpg.de> > wrote: > >>> > >>> Hello, Mritunjay, > >>> > >>> why not use the RTEMS Resource builder for 4.10 ? > >>> Heinz > >>> > >>> > >>> > On 1. Jul 2020, at 20:03, Mritunjay Sharma < > mritunjaysharma...@gmail.com> wrote: > >>> > > >>> > Hi Gedare, > >>> > > >>> > Thank you so much, since I had the experience of RSB toolchain till > now, > >>> > I forgot to build the RTEMS compiler toolchain. > >>> > > >>> > Today's update is also this that I spent the day figuring out how > >>> > to build it manually and got some really amazing blogs > >>> > which have helped me (though they were a bit difficult to find > because most pages have been > >>> > relocated). > >>> > Sharing the resources which I have used today and that are helping > me build RTEMS compiler toolchain for 4.10. > >>> > > >>> > > http://heshamelmatary.blogspot.com/2014/06/howto-build-rtems-tool-chain-for.html > >>> > > https://docs.rtems.org/releases/4.5.0/rtemsdoc-4.5.0/share/rtemsdoc/html/started/started00040.html > >>> > https://ftp.rtems.org/pub/rtems/releases/4.10/tools/ > >>> > > >>> > I am now applying patches for gdb, gcc, binutils and most > >>> > probably hope that the build will be successful. > >>> > > >>> > As suggested by Heinz, I am improving the blog as well and will post > the updated and better > >>> > version of blog by Friday. > >>> > > >>> > Thanks, > >>> > Mritunjay > >>> > > >>> > On Wed, Jul 1, 2020 at 9:25 AM Gedare Bloom <ged...@rtems.org> > wrote: > >>> > On Tue, Jun 30, 2020 at 9:42 PM Mritunjay Sharma > >>> > <mritunjaysharma...@gmail.com> wrote: > >>> > > > >>> > > Hi Gedare, > >>> > > > >>> > > Thank you for the quick response, I tried using > --target=i386-rtems4.10, which again > >>> > > gave me the same error. > >>> > > > >>> > Did you build an RTEMS compiler toolchain for 4.10? and install it to > >>> > a prefix in your $PATH? > >>> > > >>> > > "checking for RTEMS_CPU_MODEL... i386_fp > >>> > > checking for RTEMS_BSP_FAMILY... pc386 > >>> > > checking for CPU_CFLAGS... (cached) -mtune=i386 > >>> > > checking for CFLAGS_OPTIMIZE_V... (cached) -O2 -g > >>> > > checking for style of include used by make... GNU > >>> > > checking for i386-rtems4.10-gcc... no > >>> > > configure: error: no acceptable cc found in $PATH > >>> > > Makefile:712: recipe for target 'pc386' failed > >>> > > make[2]: *** [pc386] Error 1 > >>> > > make[2]: Leaving directory > '/home/mritunjay/development/rtems-4.10.2/pc-386/i386-rtems4.10/c' > >>> > > Makefile:257: recipe for target 'all-recursive' failed > >>> > > make[1]: *** [all-recursive] Error 1 > >>> > > make[1]: Leaving directory > '/home/mritunjay/development/rtems-4.10.2/pc-386/i386-rtems4.10/c' > >>> > > Makefile:275: recipe for target 'all-recursive' failed > >>> > > make: *** [all-recursive] Error 1" > >>> > > > >>> > > Mritunjay > >>> > > > >>> > > On Wed, Jul 1, 2020 at 3:48 AM Gedare Bloom <ged...@rtems.org> > wrote: > >>> > >> > >>> > >> Use --target=i386-rtems4.10 instead of --target=i386-rtems > >>> > >> > >>> > >> Does this work with 4.10.3/4.10 HEAD? > >>> > >> > >>> > >> On Tue, Jun 30, 2020 at 3:54 PM Mritunjay Sharma > >>> > >> <mritunjaysharma...@gmail.com> wrote: > >>> > >> > > >>> > >> > Hello everyone, > >>> > >> > > >>> > >> > I followed the documentation here > https://docs.rtems.org/releases/rtemsdocs-4.10.2/share/rtems/pdf/started.pdf > and > >>> > >> > started building RTEMS (4.10.2) for target architecture: i386 > and BSP: pc386. The configure seemed to be fine > >>> > >> > after entering the following command: > >>> > >> > "../configure --target=i386-rtems --disable-posix --enable-cxx > --enable-rtemsbsp=pc386 --enable-tests=samples > --prefix=/home/development/rtems-4.10.2" > >>> > >> > > >>> > >> > However, the make failed with the following error: checking for > i386-rtems-gcc... no > >>> > >> > "configure: error: no acceptable cc found in $PATH > >>> > >> > Makefile:712: recipe for target 'pc386' failed > >>> > >> > make[2]: *** [pc386] Error 1 > >>> > >> > make[2]: Leaving directory > '/home/mritunjay/development/rtems-4.10.2/pc386/i386-rtems/c' > >>> > >> > Makefile:257: recipe for target 'all-recursive' failed > >>> > >> > make[1]: *** [all-recursive] Error 1 > >>> > >> > make[1]: Leaving directory > '/home/mritunjay/development/rtems-4.10.2/pc386/i386-rtems/c' > >>> > >> > Makefile:275: recipe for target 'all-recursive' failed > >>> > >> > make: *** [all-recursive] Error 1" > >>> > >> > > >>> > >> > I checked that gcc is already installed in /usr/bin/gcc. > >>> > >> > So I am not able to figure out what exactly is causing the > error. > >>> > >> > Please help to figure out what is causing this and how it can > be resolved. > >>> > >> > I have attached the config log as well. > >>> > >> > > >>> > >> > Thanks > >>> > >> > Mritunjay > >>> > >> > > >>> > >> > > >>> > >> > > >>> > >> > > >>> > >> > > >>> > >> > > >>> > >> > On Wed, Jul 1, 2020 at 12:27 AM Mritunjay Sharma < > mritunjaysharma...@gmail.com> wrote: > >>> > >> >> > >>> > >> >> > >>> > >> >> I mistakenly forgot to cc my other mentors. > >>> > >> >> > >>> > >> >> This is what I responded : > >>> > >> >> > >>> > >> >>> Hello Heinz, > >>> > >> >>> > >>> > >> >>> Pardon the mistake I did in haste, > >>> > >> >>> as I advised by you I am now building it for RTEMS 4.10 and > then I will > >>> > >> >>> be reporting here shortly as the build completes. > >>> > >> >>> > >>> > >> >>> Thanks > >>> > >> >>> Mritunjay. > >>> > >> >> > >>> > >> >> > >>> > >> >> I am shortly sending the email for the progress I made after > working on above. > >>> > >> >> Thanks > >>> > >> >> Mritunjay > >>> > >> >> > >>> > >> >> > >>> > >> >> > >>> > >> >> On Wed, Jul 1, 2020 at 12:11 AM Heinz Junkes < > jun...@fhi-berlin.mpg.de> wrote: > >>> > >> >>> > >>> > >> >>> Hello, Mritunjay, > >>> > >> >>> > >>> > >> >>> the epics-base version in github does not work with RTEMS5 It > needs my extensions for this. > >>> > >> >>> Therefore I suggested that you first build epics7 for e.g. > RTEMS 4.10. > >>> > >> >>> Then the easiest way is to build epics7 for RTEMS-pc386-qemu. > This is fully supported. > >>> > >> >>> So you learn how to build EPics and then you can develop a > first rsb-set for it. > >>> > >> >>> If this works, we will work on RTEMS5 and xilinx-Zynq. > >>> > >> >>> Heinz > >>> > >> >>> > >>> > >> >>> > On 30. Jun 2020, at 20:10, Mritunjay Sharma < > mritunjaysharma...@gmail.com> wrote: > >>> > >> >>> > > >>> > >> >>> > > >>> > >> >>> > Hello everyone, > >>> > >> >>> > > >>> > >> >>> > While yesterday, I completed the blog for the progress > >>> > >> >>> > till date, today I started the coding part. > >>> > >> >>> > > >>> > >> >>> > The tutorial that Heinz sent me yesterday guided > >>> > >> >>> > me to make the following changes: > >>> > >> >>> > > >>> > >> >>> > 1) epics-base/configure/CONFIG_SITE: > >>> > >> >>> > # Which target architectures to cross-compile for. > >>> > >> >>> > # Definitions in configure/os/CONFIG_SITE.<host>.Common > >>> > >> >>> > # may override this setting. > >>> > >> >>> > -CROSS_COMPILER_TARGET_ARCHS= > >>> > >> >>> > - #CROSS_COMPILER_TARGET_ARCHS=vxWorks-ppc32 > >>> > >> >>> > + CROSS_COMPILER_TARGET_ARCHS=pc386 > >>> > >> >>> > +#CROSS_COMPILER_TARGET_ARCHS=RTEMS-xilinx_zynq_a9_qemu > >>> > >> >>> > > >>> > >> >>> > I did not use xilinx_zynq_a9_qemu for now because I could > >>> > >> >>> > not locate CONFIG.Common.RTEMS-xilinx_zynq_a9_qemu > >>> > >> >>> > as of now in epics-base/configure/os. > >>> > >> >>> > > >>> > >> >>> > 2) configure/os/CONFIG_SITE.Common.RTEMS : > >>> > >> >>> > > >>> > >> >>> > # Where to find RTEMS > >>> > >> >>> > # > >>> > >> >>> > # APS: > >>> > >> >>> > -RTEMS_VERSION = 4.10.2 > >>> > >> >>> > -RTEMS_BASE = /usr/local/vw/rtems/rtems-$(RTEMS_VERSION) > >>> > >> >>> > #RTEMS_VERSION = 4.10.2 > >>> > >> >>> > #RTEMS_BASE = /usr/local/vw/rtems/rtems-$(RTEMS_VERSION) > >>> > >> >>> > > >>> > >> >>> > +# FHI: > >>> > >> >>> > +RTEMS_SERIES = 5 > >>> > >> >>> > +RTEMS_VERSION = 5 > >>> > >> >>> > +RTEMS_BASE = /home/mritunjay/development/rtems/5 > >>> > >> >>> > > >>> > >> >>> > I thought to straightaway move with building it with RTEMS 5 > >>> > >> >>> > because I have done it earlier for beatnik. > >>> > >> >>> > > >>> > >> >>> > After this as an experiment, I tried the make command which, > >>> > >> >>> > as expected, generated the following error: > >>> > >> >>> > > >>> > >> >>> > "make[4]: *** No rule to make target > '../O.Common/osiFileName.h', needed by 'inc'. Stop. > >>> > >> >>> > make[4]: Leaving directory > '/home/mritunjay/development/EPICS/epics-base/modules/libcom/src/O.pc386' > >>> > >> >>> > ../../../configure/RULES_ARCHS:58: recipe for target > 'install.pc386' failed > >>> > >> >>> > make[3]: *** [install.pc386] Error 2 > >>> > >> >>> > make[3]: Leaving directory > '/home/mritunjay/development/EPICS/epics-base/modules/libcom/src' > >>> > >> >>> > ../../configure/RULES_DIRS:85: recipe for target > 'src.install' failed > >>> > >> >>> > make[2]: *** [src.install] Error 2 > >>> > >> >>> > make[2]: Leaving directory > '/home/mritunjay/development/EPICS/epics-base/modules/libcom' > >>> > >> >>> > ../configure/RULES_DIRS:85: recipe for target > 'libcom.install' failed > >>> > >> >>> > make[1]: *** [libcom.install] Error 2 > >>> > >> >>> > make[1]: Leaving directory > '/home/mritunjay/development/EPICS/epics-base/modules' > >>> > >> >>> > configure/RULES_DIRS:85: recipe for target > 'modules.install' failed > >>> > >> >>> > make: *** [modules.install] Error 2 > >>> > >> >>> > " > >>> > >> >>> > I then re-visited to what I did with beatnik and made the > following changes to > >>> > >> >>> > start with adding support for RTEMS 5: > >>> > >> >>> > > >>> > >> >>> > diff --git a/configure/CONFIG_COMMON > b/configure/CONFIG_COMMON > >>> > >> >>> > index 6c0e11e0d..d56802968 100644 > >>> > >> >>> > --- a/configure/CONFIG_COMMON > >>> > >> >>> > +++ b/configure/CONFIG_COMMON > >>> > >> >>> > @@ -142,9 +142,10 @@ BUILDLIB_SUFFIX = > $(BUILDLIB_SUFFIX_$(SHARED_LIBRARIES)) > >>> > >> >>> > #-------------------------------------------------- > >>> > >> >>> > # vpath directories > >>> > >> >>> > POSIX_YES = os/posix > >>> > >> >>> > +OS_IMPL_DIRS = $(if $(OS_API),os/$(OS_CLASS)-$(OS_API),) > os/$(OS_CLASS) > >>> > >> >>> > GENERIC_SRC_DIRS = .. $(SRC_DIRS) > >>> > >> >>> > OS_SRC_DIRS += . $(foreach dir, .. $(SRC_DIRS), \ > >>> > >> >>> > - $(addprefix $(dir)/, os/$(OS_CLASS) > $(POSIX_$(POSIX)) os/default )) > >>> > >> >>> > + $(addprefix $(dir)/, $(OS_IMPL_DIRS) > $(POSIX_$(POSIX)) os/default )) > >>> > >> >>> > CMPLR_SRC_DIRS += . $(foreach dir, .. $(SRC_DIRS), \ > >>> > >> >>> > $(addprefix $(dir)/, compiler/$(CMPLR_CLASS) > compiler/default )) > >>> > >> >>> > ALL_SRC_DIRS = $(CMPLR_SRC_DIRS) $(OS_SRC_DIRS) > $(GENERIC_SRC_DIRS) > >>> > >> >>> > diff --git a/configure/CONFIG_SITE b/configure/CONFIG_SITE > >>> > >> >>> > index 09b4c1525..f3aa4b3f7 100644 > >>> > >> >>> > --- a/configure/CONFIG_SITE > >>> > >> >>> > +++ b/configure/CONFIG_SITE > >>> > >> >>> > @@ -161,7 +161,7 @@ USE_POSIX_THREAD_PRIORITY_SCHEDULING = > YES > >>> > >> >>> > > >>> > >> >>> > # Site version number, if set will append '-' and this > string to the > >>> > >> >>> > # EPICS version number string that is reported by many > tools. > >>> > >> >>> > -EPICS_SITE_VERSION = > >>> > >> >>> > +EPICS_SITE_VERSION = > >>> > >> >>> > > >>> > >> >>> > # For GNU compiler, use pipes rather than temporary files > for > >>> > >> >>> > # communication between the various stages of compilation. > >>> > >> >>> > diff --git a/configure/os/CONFIG.Common.RTEMS > b/configure/os/CONFIG.Common.RTEMS > >>> > >> >>> > index 8425e6ef9..929510d61 100644 > >>> > >> >>> > --- a/configure/os/CONFIG.Common.RTEMS > >>> > >> >>> > +++ b/configure/os/CONFIG.Common.RTEMS > >>> > >> >>> > @@ -94,16 +94,28 @@ MODEXT=.obj > >>> > >> >>> > # operating system class (include/os/<os_class>) > >>> > >> >>> > OS_CLASS = RTEMS > >>> > >> >>> > > >>> > >> >>> > +#-------------------------------------------------- > >>> > >> >>> > +# operating system API (src/os/<os_class>-<os-api>) > >>> > >> >>> > +OS_API_4.7 = kernel > >>> > >> >>> > +OS_API_4.8 = kernel > >>> > >> >>> > +OS_API_4.9 = kernel > >>> > >> >>> > +OS_API_4.10 = kernel > >>> > >> >>> > +OS_API = $(firstword $(OS_API_$(RTEMS_SERIES)) posix) > >>> > >> >>> > + > >>> > >> >>> > #-------------------------------------------------- > >>> > >> >>> > # Operating system flags > >>> > >> >>> > -OP_SYS_LDLIBS += -lrtemsCom -lc -lrtemscpu -lCom -lnfs -lm > >>> > >> >>> > -OP_SYS_LDFLAGS += $(CPU_CFLAGS) -u Init \ > >>> > >> >>> > +OP_SYS_LDLIBS += -lrtemsCom -lc -lrtemscpu -lCom -lnfs -lm > >>> > >> >>> > +# newest Rtems > 2019 needs this -ltftpfs > >>> > >> >>> > + > >>> > >> >>> > +OP_SYS_LDFLAGS_posix += -u POSIX_Init > >>> > >> >>> > +OP_SYS_LDFLAGS_kernel += $(CPU_CFLAGS) -u Init \ > >>> > >> >>> > $(PROJECT_RELEASE)/lib/no-dpmem.rel \ > >>> > >> >>> > $(PROJECT_RELEASE)/lib/no-mp.rel \ > >>> > >> >>> > $(PROJECT_RELEASE)/lib/no-part.rel \ > >>> > >> >>> > $(PROJECT_RELEASE)/lib/no-signal.rel \ > >>> > >> >>> > $(PROJECT_RELEASE)/lib/no-rtmon.rel > >>> > >> >>> > > >>> > >> >>> > +OP_SYS_LDFLAGS += $(CPU_FLAGS) $(OP_SYS_LDFLAGS_$(OS_API)) > >>> > >> >>> > MOD_SYS_LDFLAGS += $(CPU_CFLAGS) -Wl,-r -nostdlib > >>> > >> >>> > > >>> > >> >>> > # Do not link against libraries which are part of the > Generic Image > >>> > >> >>> > diff --git a/modules/libcom/RTEMS/Makefile > b/modules/libcom/RTEMS/Makefile > >>> > >> >>> > index b46889db1..cb1a63b97 100644 > >>> > >> >>> > --- a/modules/libcom/RTEMS/Makefile > >>> > >> >>> > +++ b/modules/libcom/RTEMS/Makefile > >>> > >> >>> > @@ -11,6 +11,9 @@ TOP = ../../.. > >>> > >> >>> > include $(TOP)/configure/CONFIG > >>> > >> >>> > include $(TOP)/configure/CONFIG_LIBCOM_VERSION > >>> > >> >>> > > >>> > >> >>> > +#for checking > >>> > >> >>> > +SRC_DIRS += ../$(OS_API) > >>> > >> >>> > + > >>> > >> >>> > PERL_SCRIPTS += epicsMakeMemFs.pl > >>> > >> >>> > > >>> > >> >>> > INC += epicsRtemsInitHooks.h > >>> > >> >>> > (END) > >>> > >> >>> > > >>> > >> >>> > I will start with further changes tomorrow. Please find the > changes pushed > >>> > >> >>> > here: > https://github.com/epics-base/epics-base/compare/7.0...mritunjaysharma394:GSoC_pc-386 > >>> > >> >>> > > >>> > >> >>> > I will be pleased to have the feedback and if I am on the > correct course now. > >>> > >> >>> > > >>> > >> >>> > I will also like to inform that I have filled the GSoC > Phase 1 Evaluation form and I > >>> > >> >>> > will request all my mentors to please feel free to fill the > form before the deadline > >>> > >> >>> > and I hope that from now I will not disappoint with my > progress. > >>> > >> >>> > > >>> > >> >>> > It is my bad that I still have not been able to reach out > to one more > >>> > >> >>> > mentor Pavel Pisa. Please if possible share the email id of > Pavel and cc > >>> > >> >>> > Pavel in the replies to the email so that Pavel s aware of > the progress and I > >>> > >> >>> > can apologise for my inability to connect with Pavel > earlier. > >>> > >> >>> > > >>> > >> >>> > Thanks, > >>> > >> >>> > Mritunjay. > >>> > >> >>> > > >>> > >> >>> > > >>> > >> >>> > > >>> > >> >>> > > >>> > >> >>> > > >>> > >> >>> > > >>> > >> >>> > >>> > > _______________________________________________ > > devel mailing list > > devel@rtems.org > > http://lists.rtems.org/mailman/listinfo/devel >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel