On Wed, Nov 4, 2020 at 6:28 AM Heinz Junkes <jun...@fhi-berlin.mpg.de> wrote:
> Hello, Chris, > unfortunately it is not quite so simple. The Beatnik board uses > for the Ethernet the Marvell Discovery II MV64360 (GT64360) > and there two of the three built-in Ethernet controllers. > > Till Straumann has written a driver for it called "mve" and unfortunately > it > is not available in freebsd. Probably too rare or I did not search > properly. > Yep. That's right. It is a custom driver for RTEMS as best I can tell. This BSP and the mvme500 have the same challenge. I've started another thread on the broader topic of BSPs needed by the EPICS community and their path forward. I didn't want to hijack this one since it needs to stay focused on this one board and technical. --joel > > Viele Grüße > Heinz Junkes > -- > Experience directly varies with equipment ruined. > > > > > On 27. Oct 2020, at 05:06, Chris Johns <chr...@rtems.org> wrote: > > > > On 26/10/20 7:32 pm, Heinz Junkes wrote: > >> Good morning Chris, > >> i will now try out libbsd on a MVME6100 (beatnik). > >> Is the mentioned patch in git? > > > > The PCI patch is in rtems-libbsd.git on the master and 6-freebsd-12 > branches. > > > >> Or do I have to prepare something special? > > > > Yes I think you may need to patch libbsd for the beatnik bvoard. I have > not > > looked at that board and the net drivers it needs. The current list is > we have > > in libbsd is: > > > > > https://git.rtems.org/rtems-libbsd/tree/rtemsbsd/include/machine/rtems-bsd-nexus-bus.h?h=6-freebsd-12 > > > > The BSP support is handled here: > > > > > https://git.rtems.org/rtems-libbsd/tree/rtemsbsd/include/bsp/nexus-devices.h?h=6-freebsd-12 > > > > The define is based on the header guard for the BSP: > > > > https://git.rtems.org/rtems/tree/bsps/powerpc/beatnik/include/bsp.h#n25 > > > > I hope this helps. > > > > Chris > > _______________________________________________ > devel mailing list > devel@rtems.org > http://lists.rtems.org/mailman/listinfo/devel
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel