Hi Heinz, Thanks for the hardware tests. It's great to see the tests running successfully on hardware!
Best regards, Vijay On Wed, Mar 3, 2021 at 1:34 PM junkes <jun...@fhi-berlin.mpg.de> wrote: > > Hallo Vijay, > You don't have to apologize. I am glad that you are doing this. And now > it works perfectly. > > Even on the Hardware: > > Copyright(C)2008-2009,Emerson Network Power-Embedded Computing,Inc. > All Rights Reserved > Copyright Motorola Inc. 1999-2007, All Rights Reserved > MOTLoad RTOS Version 2.0, PAL Version 2.3 RM01 > Fri Jan 23 14:47:54 MST 2009 > > MPU-Type =MPC74x7 > MPU-Int Clock Speed =1266MHz > MPU-Ext Clock Speed =133MHz > MPU-Int Cache(L2) Enabled, 512KB, L2CR =C0000000 > MPU-Ext Cache(L3) Enabled, 2MB, 211MHz, L3CR =DC026300 > > PCI bus instance 0 =64 bit, 133 Mhz, PCI-X > PCI bus instance 1 =64 bit, PCI > > Reset/Boot Vector =Flash1 > > Local Memory Found =20000000 (&536870912) > User Download Buffer =006B7000:008B6FFF > > MVME6100> tftpGet -s141.14.128.9 -c141.14.128.12 -a04000000 -fticker.exe > Network Loading from: /dev/enet0 > Loading File: ticker.exe > Load Address: 04000000 > Download Buffer Size = User Defined > > Client IP Address = 141.14.128.12 > Server IP Address = 141.14.128.9 > Gateway IP Address = 141.14.128.253 > Subnet IP Address Mask = 255.255.255.0 > > Network File Load in Progress... > > Bytes Received =&252200, Bytes Loaded =&252200 > Bytes/Second =&252200, Elapsed Time =1 Second(s) > ----------------------------------------- > config addr is 0xf1000cf8 > config data is 0xf1000cfc > Welcome to RTEMS rtems-6.0.0 (PowerPC/Generic (classic FPU)/beatnik) > CPU: MPC7457 > Board Type: MVME6100-0163 (S/N E173D27) > Bus Clock Freq: 133333333 Hz > CPU Clock Freq: 1266666654 Hz > Memory: 536870912 bytes > ----------------------------------------- > Now BSP_mem_size = 0x1fe00000 > Configuration.work_space_size = 2120 > Page table setup finished; will activate it NOW... > Going to start PCI buses scanning and initialization > Number of PCI buses found is : 3 > MSR 0x2003032 > Exit from bspstart > unable to find the universe in pci config space > Tundra Tsi148 PCI-VME bridge detected at 0x81100000, IRQ 84 > Tsi148 Outbound Ports: > Port VME-Addr Size PCI-Adrs Mode: > 0: 0x20000000 0x0e000000 0x90000000 A32, SUP, D32, SCT > 1: 0x00000000 0x00ff0000 0x9f000000 A24, SUP, D32, SCT > 2: 0x00000000 0x00010000 0x9fff0000 A16, SUP, D32, SCT > 7: 0x00000000 0x01000000 0x9e000000 CSR, SUP, D32, SCT > Tsi148 Inbound Ports: > Port VME-Addr Size PCI-Adrs Mode: > 0: 0x90000000 0x1fe00000 0x00000000 A32, PGM, DAT, SUP, USR, MBLT, > BLT > vmeTsi148 IRQ manager: looking for registers on VME... > Trying to find CSR on VME... > vmeTsi148 - IRQ manager using VME CSR to flush FIFO > > > *** BEGIN OF TEST NETWORKING 1 *** > *** TEST VERSION: 6.0.0.4fa5e77ba3a00f8ac61251b6c049c98102583d57 > *** TEST STATE: EXPECTED_PASS > *** TEST BUILD: RTEMS_POSIX_API > *** TEST TOOLS: 10.2.1 20210205 (RTEMS 6, RSB > 61dcadee0825867ebe51f9f367430ef75b8fe9c0, Newlib d4a756f) > Try AF_INET6 > force node name > force service name > get node only > get service only > get node and service > get node and service with maximum number of characters for IP > > *** END OF TEST NETWORKING 1 *** > > fatal source: RTEMS_FATAL_SOURCE_EXIT > bsp_fatal_extension(): RTEMS terminated -- no way back to MotLoad so I > reset the card > Printing a stack trace for your convenience :-) > > 0x00017368--> 0x00017368--> 0x00122684--> 0x00100928--> 0x00099556 > 0x00016936--> 0x00014728--> 0x00113540--> 0x00113364 > > > > Copyright(C)2008-2009,Emerson Network Power-Embedded Computing,Inc. > All Rights Reserved > Copyright Motorola Inc. 1999-2007, All Rights Reserved > MOTLoad RTOS Version 2.0, PAL Version 2.3 RM01 > Fri Jan 23 14:47:54 MST 2009 > > MPU-Type =MPC74x7 > MPU-Int Clock Speed =1266MHz > MPU-Ext Clock Speed =133MHz > MPU-Int Cache(L2) Enabled, 512KB, L2CR =C0000000 > MPU-Ext Cache(L3) Enabled, 2MB, 211MHz, L3CR =DC026300 > > PCI bus instance 0 =64 bit, 133 Mhz, PCI-X > PCI bus instance 1 =64 bit, PCI > > Reset/Boot Vector =Flash1 > > Local Memory Found =20000000 (&536870912) > User Download Buffer =006B7000:008B6FFF > > MVME6100> tftpGet -s141.14.128.9 -c141.14.128.12 -a04000000 -fticker.exe > Network Loading from: /dev/enet0 > Loading File: ticker.exe > Load Address: 04000000 > Download Buffer Size = User Defined > > Client IP Address = 141.14.128.12 > Server IP Address = 141.14.128.9 > Gateway IP Address = 141.14.128.253 > Subnet IP Address Mask = 255.255.255.0 > > Network File Load in Progress... > > Bytes Received =&502732, Bytes Loaded =&502732 > Bytes/Second =&502732, Elapsed Time =1 Second(s) > MVME6100> ne----------------------------------------- > config addr is 0xf1000cf8 > config data is 0xf1000cfc > Welcome to RTEMS rtems-6.0.0 (PowerPC/Generic (classic FPU)/beatnik) > CPU: MPC7457 > Board Type: MVME6100-0163 (S/N E173D27) > Bus Clock Freq: 133333333 Hz > CPU Clock Freq: 1266666654 Hz > Memory: 536870912 bytes > ----------------------------------------- > Now BSP_mem_size = 0x1fe00000 > Configuration.work_space_size = 80000 > Page table setup finished; will activate it NOW... > Going to start PCI buses scanning and initialization > Number of PCI buses found is : 3 > MSR 0x2003032 > Exit from bspstart > unable to find the universe in pci config space > Tundra Tsi148 PCI-VME bridge detected at 0x81100000, IRQ 84 > Tsi148 Outbound Ports: > Port VME-Addr Size PCI-Adrs Mode: > 0: 0x20000000 0x0e000000 0x90000000 A32, SUP, D32, SCT > 1: 0x00000000 0x00ff0000 0x9f000000 A24, SUP, D32, SCT > 2: 0x00000000 0x00010000 0x9fff0000 A16, SUP, D32, SCT > 7: 0x00000000 0x01000000 0x9e000000 CSR, SUP, D32, SCT > Tsi148 Inbound Ports: > Port VME-Addr Size PCI-Adrs Mode: > 0: 0x90000000 0x1fe00000 0x00000000 A32, PGM, DAT, SUP, USR, MBLT, > BLT > vmeTsi148 IRQ manager: looking for registers on VME... > Trying to find CSR on VME... > vmeTsi148 - IRQ manager using VME CSR to flush FIFO > > > *** BEGIN OF TEST LOOPBACK *** > *** TEST VERSION: 6.0.0.4fa5e77ba3a00f8ac61251b6c049c98102583d57 > *** TEST STATE: EXPECTED_PASS > *** TEST BUILD: RTEMS_POSIX_API > *** TEST TOOLS: 10.2.1 20210205 (RTEMS 6, RSB > 61dcadee0825867ebe51f9f367430ef75b8fe9c0, Newlib d4a756f) > "Network" initializing! > "Network" initialized! > Try running client with no server present. > Should fail with `connection refused'. > Connect to server. > Can't connect to server: Connection refused > Client closing connection. > > Start server. > > Try running client with server present. > Connect to server. > Can't connect to server: Connection refused > Client closing connection. > Client task terminating. > Create socket. > Bind socket. > > Try running two clients. > Connect to server. > Connect to server. > ACCEPTED:2130706433 > ACCEPTED:2130706433 > Write 22-byte message to server. > Write 22-byte message to server. > Read 43 from server: Server received 22 (Hi there, server (2).) > Read 43 from server: Server received 22 (Hi there, server (3).) > Client closing connection. > Client task terminating. > Worker task terminating. > Client closing connection. > Client task terminating. > Worker task terminating. > > Try running three clients. > Connect to server. > Connect to server. > Connect to server. > ACCEPTED:2130706433 > ACCEPTED:2130706433 > ACCEPTED:2130706433 > Write 22-byte message to server. > Write 22-byte message to server. > Write 22-byte message to server. > Read 43 from server: Server received 22 (Hi there, server (4).) > Read 43 from server: Server received 22 (Hi there, server (5).) > Read 43 from server: Server received 22 (Hi there, server (6).) > Client closing connection. > Client task terminating. > Worker task terminating. > Client closing connection. > Client task terminating. > Worker task terminating. > Client closing connection. > Client task terminating. > Worker task terminating. > > *** END OF TEST LOOPBACK *** > > fatal source: RTEMS_FATAL_SOURCE_EXIT > bsp_fatal_extension(): RTEMS terminated -- no way back to MotLoad so I > reset the card > Printing a stack trace for your convenience :-) > > 0x00224388--> 0x00224388--> 0x00334484--> 0x00311900--> 0x00310528 > 0x00289968--> 0x00348388--> 0x00013652--> 0x00325192--> 0x00325016 > > > > Copyright(C)2008-2009,Emerson Network Power-Embedded Computing,Inc. > > Danke! > Heinz > > > > > > On 2021-03-03 21:03, Vijay Kumar Banerjee wrote: > > On Wed, Mar 3, 2021 at 12:37 PM junkes <jun...@fhi-berlin.mpg.de> > > wrote: > >> > >> Hi Vijay, > >> I tried it again: > >> > > Hi Heinz, > > > > I'm really sorry that the build crashed again. I missed the telnetd.h > > file probably because it was somewhere in my build prefix from one of > > the rtems builds. I have pushed a fix on the rtems repo and the > > rtems-net-legacy repo. This time I was more thorough and used a new > > prefix location, I believe it won't break this time. > > > > Thank you for helping with the testing. I really appreciate it. > > > > > > Best regards, > > Vijay > > > >> # building kernel > >> #git clone git://git.rtems.org/rtems.git kernel > >> git clone git://git.rtems.org/vijay/rtems.git kernel > >> cd kernel > >> git checkout devel-no-libnet > >> > >> # build and install bsp > >> # 1. Test with waf > >> #-e "s|RTEMS_NETWORKING = False|RTEMS_NETWORKING = True|" \ > >> ./waf bsp_defaults --rtems-bsps=powerpc/beatnik > config.ini > >> sed -i \ > >> -e "s|RTEMS_POSIX_API = False|RTEMS_POSIX_API = True|" \ > >> -e "s|BUILD_TESTS = False|BUILD_TESTS = True|" \ > >> config.ini > >> ./waf configure --prefix=/home/junkes/MVME6100_testing/rtems/6 > >> ./waf > >> ./waf install > >> > >> cd .. > >> > >> # building extra legacy net > >> git clone git://git.rtems.org/vijay/rtems-net-legacy.git legacyNet > >> cd legacyNet > >> git submodule init > >> git submodule update > >> > >> ./waf configure --prefix=/home/junkes/MVME6100_testing/rtems/6 > >> > >> ./waf build --rtems-archs=powerpc --rtems-bsps=beatnik > >> > >> > >> Much better, but still a missing file? > >> > >> [125/235] Compiling libc/res_mkquery.c > >> [126/235] Compiling libc/inet_lnaof.c > >> [127/235] Compiling librpc/src/xdr/xdr_array.c > >> ../../telnetd/check_passwd.c:70:10: fatal error: rtems/telnetd.h: No > >> such file or directory > >> 70 | #include <rtems/telnetd.h> > >> | ^~~~~~~~~~~~~~~~~ > >> compilation terminated. > >> > >> ../../telnetd/telnetd.c:57:10: fatal error: rtems/telnetd.h: No such > >> file or directory > >> 57 | #include <rtems/telnetd.h> > >> | ^~~~~~~~~~~~~~~~~ > >> compilation terminated. > >> > >> Waf: Leaving directory > >> `/home/junkes/MVME6100_testing/legacyNet/build/powerpc-rtems6-beatnik' > >> Build failed > >> -> task in 'network_objects' failed with exit status 1 (run with -v > >> to > >> display more information) > >> -> task in 'network_objects' failed with exit status 1 (run with -v > >> to > >> display more information) > >> > >> Heinz _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
