Ok, thanks for the update. On Sun, Apr 25, 2021 at 11:11 PM Kinsey Moore <kinsey.mo...@oarcorp.com> wrote:
> This error occurs because the AArch64 port does not yet support SMP. It’s > on my list of things to do, but it’s likely a couple months before I start > on that work. > > > > Kinsey > > > > *From:* devel <devel-boun...@rtems.org> *On Behalf Of *Richi Dubey > *Sent:* Sunday, April 25, 2021 01:05 > *To:* Vijay Kumar Banerjee <vi...@rtems.org> > *Cc:* rtems-de...@rtems.org <devel@rtems.org> > *Subject:* Re: RTEMS Bootstrap fails > > > > Hi, > > > > The docs > <https://docs.rtems.org/branches/master/user/bld/#migration-from-autoconf-automake> > says RTEMS_SMP = True should work, but I get a warning: > > > > rdubey@hpc1:~/quick-start/src/rtems$ echo "RTEMS_SMP = True">>config.ini > > rdubey@hpc1:~/quick-start/src/rtems$ ./waf configure > --prefix=/home/rdubey/quick-start/waf-path > Setting top to : > /home/rdubey/quick-start/src/rtems > Setting out to : > /home/rdubey/quick-start/src/rtems/build > Configure board support package (BSP) : aarch64/xilinx_zynqmp_lp64 > Checking for program 'aarch64-rtems6-gcc' : > /home/rdubey/quick-start/rtems/6/bin/aarch64-rtems6-gcc > Checking for program 'aarch64-rtems6-g++' : > /home/rdubey/quick-start/rtems/6/bin/aarch64-rtems6-g++ > Checking for program 'aarch64-rtems6-ar' : > /home/rdubey/quick-start/rtems/6/bin/aarch64-rtems6-ar > Checking for program 'aarch64-rtems6-ld' : > /home/rdubey/quick-start/rtems/6/bin/aarch64-rtems6-ld > Checking for program 'ar' : > /home/rdubey/quick-start/rtems/6/bin/aarch64-rtems6-ar > Checking for program 'g++, c++' : > /home/rdubey/quick-start/rtems/6/bin/aarch64-rtems6-g++ > Checking for program 'ar' : > /home/rdubey/quick-start/rtems/6/bin/aarch64-rtems6-ar > Checking for program 'gas, gcc' : > /home/rdubey/quick-start/rtems/6/bin/aarch64-rtems6-gcc > Checking for program 'ar' : > /home/rdubey/quick-start/rtems/6/bin/aarch64-rtems6-ar > Checking for program 'gcc, cc' : > /home/rdubey/quick-start/rtems/6/bin/aarch64-rtems6-gcc > Checking for program 'ar' : > /home/rdubey/quick-start/rtems/6/bin/aarch64-rtems6-ar > Checking for asm flags '-MMD' : yes > Checking for c flags '-MMD' : yes > Checking for cxx flags '-MMD' : yes > Checking for program 'rtems-bin2c' : > /home/rdubey/quick-start/rtems/6/bin/rtems-bin2c > Checking for program 'gzip' : /bin/gzip > Checking for program 'rtems-ld' : > /home/rdubey/quick-start/rtems/6/bin/rtems-ld > Checking for program 'rtems-syms' : > /home/rdubey/quick-start/rtems/6/bin/rtems-syms > Checking for program 'xz' : /usr/bin/xz > Unknown configuration option : RTEMS_SMP > 'configure' finished successfully (1.743s) > > > > On Sun, Apr 25, 2021 at 10:40 AM Vijay Kumar Banerjee <vi...@rtems.org> > wrote: > > On Sat, Apr 24, 2021 at 11:08 PM Richi Dubey <richidu...@gmail.com> wrote: > > > > It does. Thanks for your prompt response! > > > > Also, how do I enable SMP tests and rtems-debug? > > I think the options are these: > > RTEMS_SMP = True > RTEMS_DEBUG = True > > Add it to the config.ini file and configure it again before building. > > > > > > On Fri, Apr 23, 2021 at 9:03 PM Vijay Kumar Banerjee <vi...@rtems.org> > wrote: > >> > >> Hi Richi, > >> > >> > >> On Fri, Apr 23, 2021 at 9:22 AM Richi Dubey <richidu...@gmail.com> > wrote: > >> > > >> > Hi, > >> > > >> > I am building a new RTEMS from master source (to build the > xilinx_zynqmp_lp64 bsp from the aarch64 arch), and these are the steps I > followed: > >> > > >> > mkdir -p $HOME/quick-start/src > >> > cd $HOME/quick-start/src > >> > git clone https://github.com/RTEMS/rtems-source-builder.git rsb > >> > git clone https://github.com/RTEMS/rtems.git > >> > cd $HOME/quick-start/src/rsb/rtems > >> > ../source-builder/sb-set-builder --prefix=$HOME/quick-start/rtems/6 > 6/rtems-aarch64 > >> > export PATH=$HOME/quick-start/rtems/6/bin:"$PATH" > >> > cd $HOME/quick-start/src/rtems > >> > ./rtems-bootstrap > >> > > >> > -And I get this error-: > >> > 118/119: autoreconf: c/src/make/configure.ac > >> > 119/119: autoreconf: cpukit/configure.ac > >> > automake: error: cannot open < libnetworking/headers.am: No such > file or directory > >> > autoreconf: automake failed with exit status: 1 > >> > error: error: autoreconf: autoreconf -i --no-recursive > >> > Bootstrap FAILED. > >> > > >> > >> Please try using waf. > >> > >> echo "[aarch64/xilinx_zynqmp_lp64]" > config.ini > >> echo "BUILD_TESTS=True" >> config.ini > >> ./waf configure > >> ./waf > >> ./waf install > >> > >> > Can someone please help me with this? > >> > >> I hope the above instructions will build it without issues. > >> > >> Best regards, > >> Vijay > >> > _______________________________________________ > >> > devel mailing list > >> > devel@rtems.org > >> > http://lists.rtems.org/mailman/listinfo/devel > >
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel