Please use the the --subject-prefix="PATCH rtems-libbsd" as mentioned in https://docs.rtems.org/branches/master/eng/vc-users.html#creating-a-patch
This helps set the context of the patch review better for non-rtems.git patches. This patch looks good to me. On Tue, Jun 8, 2021 at 2:19 PM Kinsey Moore <kinsey.mo...@oarcorp.com> wrote: > > Use the new options from the ZynqMP BSPs to allow selection of the > available CGEM ethernet interfaces. > --- > rtemsbsd/include/bsp/nexus-devices.h | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/rtemsbsd/include/bsp/nexus-devices.h > b/rtemsbsd/include/bsp/nexus-devices.h > index 5b51de7e..5c1bab42 100644 > --- a/rtemsbsd/include/bsp/nexus-devices.h > +++ b/rtemsbsd/include/bsp/nexus-devices.h > @@ -115,7 +115,18 @@ RTEMS_BSD_DRIVER_XILINX_ZYNQMP_SLCR; > * CGEM3 is used for LibBSD because all Zynq Ultrascale+ MPSoC dev boards > treat > * the highest-mapped CGEM as the primary interface. > */ > +#if BSP_XILINX_ZYNQMP_USE_CGEM0 > +RTEMS_BSD_DRIVER_XILINX_ZYNQMP_CGEM0(ZYNQMP_IRQ_ETHERNET_0); > +#endif > +#if BSP_XILINX_ZYNQMP_USE_CGEM1 > +RTEMS_BSD_DRIVER_XILINX_ZYNQMP_CGEM1(ZYNQMP_IRQ_ETHERNET_1); > +#endif > +#if BSP_XILINX_ZYNQMP_USE_CGEM2 > +RTEMS_BSD_DRIVER_XILINX_ZYNQMP_CGEM2(ZYNQMP_IRQ_ETHERNET_2); > +#endif > +#if BSP_XILINX_ZYNQMP_USE_CGEM3 > RTEMS_BSD_DRIVER_XILINX_ZYNQMP_CGEM3(ZYNQMP_IRQ_ETHERNET_3); > +#endif > RTEMS_BSD_DRIVER_E1000PHY; > RTEMS_BSD_DRIVER_UKPHY; > > -- > 2.20.1 > > _______________________________________________ > devel mailing list > devel@rtems.org > http://lists.rtems.org/mailman/listinfo/devel _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel