Hi all, I'm working on adding a nexus device driver for uC5282, and I got as far as getting the telnetd started on port 23, and I can ping the loopback interface. However, the test apps were crashing before I made some environment variable changes, so I'm assuming that the "Network interface is not configured" might be a configuration issue as well.
The error I'm getting: err: fec0: ipv4_sendrawpacket: Network interface is not configured ifconfig: SHLL [/] # ifconfig fec0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:06:3b:02:cd:1b inet6 fe80::206:3bff:fe02:cd1b%fec0 prefixlen 64 tentative scopeid 0x1 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet 127.0.0.1 netmask 0xffffff00 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> groups: lo relevant environment variables: HWADDR0=00:06:3B:02:CD:1B FW_VERSION=010810003 _0=10000000:400000:RW RAMIMAGE=yes CACHE=on NETMAST=255.255.255.0 NETMASK=255.255.255.0 IP_GATEWAY=255.255.255.0 TFTPSERVER=192.168.100.1 TFTPIMAGE=image.cramfs HOSTNAME=coldfire SERVER=10.0.0.161 NAMESERVER=10.0.0.167 IPADDR0=10.0.0.27 IPADDR0_100FULL=y Any suggestion or help in getting it running is much appreciated. Also, I do not have a JTAG emulator supported for MCF5282, so it's a bit difficult to debug on the board. Any advice on debugging will also be very helpful. Best regards, Vijay _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel