Network configuration is now automatic and requires no user configuration. --- user/bsps/aarch64/xilinx-zynqmp.rst | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/user/bsps/aarch64/xilinx-zynqmp.rst b/user/bsps/aarch64/xilinx-zynqmp.rst index 71b6842..90270db 100644 --- a/user/bsps/aarch64/xilinx-zynqmp.rst +++ b/user/bsps/aarch64/xilinx-zynqmp.rst @@ -59,14 +59,9 @@ Network Configuration --------------------- When used with LibBSD, these BSP variants support networking via the four -Cadence GEM instances present on all ZynqMP hardware variants. These are enabled -using config.inc in LibBSD by setting any of the following constants to 1: -NET_CFG_ZYNQMP_USE_CGEM0 = 1 -NET_CFG_ZYNQMP_USE_CGEM1 = 1 -NET_CFG_ZYNQMP_USE_CGEM2 = 1 -NET_CFG_ZYNQMP_USE_CGEM3 = 1 - -Most ZynqMP dev boards use CGEM3. None of the interfaces are enabled by default. +Cadence GEM instances present on all ZynqMP hardware variants. All interfaces +are enabled by default, but only interfaces with operational MII busses will be +recognized and usable in RTEMS. Most ZynqMP dev boards use CGEM3. Running Executables on QEMU --------------------------- -- 2.20.1 _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
