Danke Sebastian, I have been able to place the drivers from Till in rtems-libbsd without much effort. I can boot the MVME6100 with the mv653xx: ... mve0 on nexus0 miibus0: <MII bus> on mve0 ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto info: mve0: Ethernet address: ec:9e:cd:1a:12:3f info: lo0: link state changed to UP …
Can/should I create a pull request so that this can be transferred to the master? rtems-libbsd$ git status On branch 6-freebsd-12 Your branch is up to date with 'origin/6-freebsd-12'. Changes to be committed: (use "git reset HEAD <file>..." to unstage) new file: rtemsbsd/include/bsp/mv643xx_eth.h new file: rtemsbsd/sys/dev/mve/mv643xx_nexus.c new file: rtemsbsd/sys/powerpc/drivers/net/if_mve/mv643xx_eth.c Changes not staged for commit: (use "git add <file>..." to update what will be committed) (use "git checkout -- <file>..." to discard changes in working directory) modified: libbsd.py modified: rtemsbsd/include/bsp/nexus-devices.h Heinz > On 3. Feb 2022, at 08:05, Sebastian Huber > <sebastian.hu...@embedded-brains.de> wrote: > > Hello Heinz, > > On 03/02/2022 06:57, Heinz Junkes wrote: >> I think I slept through the latest development. Sorry about that. >> I wanted to integrate a pull request from Till >> (https://github.com/RTEMS/rtems/pull/41) >> into rtems6. But unfortunately I can no longer find the sources. >> $: git clone git://git.rtems.org/rtems.git kernel >> $: cd kernel >> $: ls c >> ACKNOWLEDGEMENTS >> I am used to this: >> $: git checkout 5 >> Switched to branch '5' >> Your branch is up to date with 'origin/5’. >> $: ls c >> acinclude.m4 ACKNOWLEDGEMENTS configure.ac Makefile.am src >> I also saw this ticket (https://devel.rtems.org/ticket/4046): >> Bootstrapping is going away with the new build system and until then the >> command in rtems.git should be used. >> Unfortunately, I'm not getting anywhere with it. >> How must/should I proceed? > > the BSP sources are in "bsps" since RTEMS 5. In "c" is mostly the old build > system in RTEMS 5 which was removed in RTEMS 6. > > I tried to rebase the pull request to RTEMS 6 (master), however, then I > noticed that the old network stack and all the network interface drivers are > not longer included in the RTEMS sources. The old network stack is now in a > separate repository: > > https://git.rtems.org/rtems-net-legacy/ > > -- > embedded brains GmbH > Herr Sebastian HUBER > Dornierstr. 4 > 82178 Puchheim > Germany > email: sebastian.hu...@embedded-brains.de > phone: +49-89-18 94 741 - 16 > fax: +49-89-18 94 741 - 08 > > Registergericht: Amtsgericht München > Registernummer: HRB 157899 > Vertretungsberechtigte Geschäftsführer: Peter Rasmussen, Thomas Dörfler > Unsere Datenschutzerklärung finden Sie hier: > https://embedded-brains.de/datenschutzerklaerung/ _______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel