This is much clearer. I now understand the limitation. OK to push.
Thanks Chris On 20/7/2022 11:34 pm, Kinsey Moore wrote: > --- > user/bsps/aarch64/xilinx-zynqmp.rst | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/user/bsps/aarch64/xilinx-zynqmp.rst > b/user/bsps/aarch64/xilinx-zynqmp.rst > index 78bff12..239ebe4 100644 > --- a/user/bsps/aarch64/xilinx-zynqmp.rst > +++ b/user/bsps/aarch64/xilinx-zynqmp.rst > @@ -244,6 +244,18 @@ Cadence GEM instances present on all ZynqMP hardware > variants. All interfaces > are enabled by default, but only interfaces with operational MII busses will > be > recognized and usable in RTEMS. Most ZynqMP dev boards use CGEM3. > > +When used with lwIP from the rtems-lwip integration repository, these BSP > +variants support networking via CGEM0 and one of the other CGEM* instances > +simultaneously. This is a limitation of the Xilinx driver, specifically > +in code referring directly to XPAR_XEMACPS_0_BASEADDR. Attempting to use more > +than two interfaces simultaneously may cause unexpected behavior. Attempting > to > +use a set of two interfaces that does not include CGEM0 may cause unexpected > +behavior. > + > +The interfaces will not come up by default under lwIP and must be configured > +manually. There are examples of this in the start_networking() implementation > +in netstart.c as used by the network tests. > + > Running Executables on QEMU > --------------------------- > _______________________________________________ devel mailing list [email protected] http://lists.rtems.org/mailman/listinfo/devel
