Hi Joel and Chris, Yes, and I will be working on the rsb patch for renode installation next.
Regards, Mazaya On Wed, Jun 28, 2023 at 12:34 PM Chris Johns <chr...@rtems.org> wrote: > I am as well > > Chris > > On 28/6/2023 12:25 am, Joel Sherrill wrote: > > I'm OK with this patch. > > > > Is it assuming that you installed renode on your own -- not using the > RSB? > > > > --joel > > > > On Mon, Jun 26, 2023 at 5:37 PM Muhammad Sulthan Mazaya > > <msulthanmaz...@gmail.com <mailto:msulthanmaz...@gmail.com>> wrote: > > > > Hi Chris, > > > > Yes they are the same. I thought there was an email error, so I > re-send it > > twice. > > > > On Tue, 27 Jun 2023, 07:46 Chris Johns, <chr...@rtems.org > > <mailto:chr...@rtems.org>> wrote: > > > > Hi Muhammad, > > > > The patch looks good, thanks. > > > > Are the 3 posted patches the same version? > > > > Chris > > > > On 26/6/2023 2:17 pm, Muhammad Sulthan Mazaya wrote: > > > Patch for the implementation of renode on rtems-test. > Currently, renode > > > installation has not been implemented in rsb. Thus, for > testing, you can > > > install renode by referring to the documentation link below. > > > > > > Downloads for debian, fedora, arch, macOS, and windows: > > > https://renode.io/#downloads <https://renode.io/#downloads> > > > > > > Alternatively, you can access Renode's GitHub releases: > > > https://github.com/renode/renode/releases/tag/v1.13.3 > > <https://github.com/renode/renode/releases/tag/v1.13.3> > > > > > > You can also build it from source: > > > > > > https://renode.readthedocs.io/en/latest/advanced/building_from_sources.html#building-from-source > < > https://renode.readthedocs.io/en/latest/advanced/building_from_sources.html#building-from-source > > > > > > > > This patch consists of changes to test kendrytek210 using > renode. To > > > test it, you can build the kendrytek210 test suite as > instructed in the > > > rtems-docs (Alan's patch here: > > https://lists.rtems.org/pipermail/devel/2023-April/074838.html > > <https://lists.rtems.org/pipermail/devel/2023-April/074838.html > >). > > > Then, use the following command to run the test suite. > > > > > > rtems-test --rtems-bsp=kendrytek210-renode [test-suite-path] > > > > > > --- > > > .../testing/bsps/kendrytek210-renode.ini | 38 +++++++++++ > > > tester/rtems/testing/renode.cfg | 64 > +++++++++++++++++++ > > > .../testing/renode_scripts/kendrytek210.resc | 53 > +++++++++++++++ > > > 3 files changed, 155 insertions(+) > > > create mode 100644 > tester/rtems/testing/bsps/kendrytek210-renode.ini > > > create mode 100644 tester/rtems/testing/renode.cfg > > > create mode 100644 > tester/rtems/testing/renode_scripts/kendrytek210.resc > > > > > > diff --git a/tester/rtems/testing/bsps/kendrytek210-renode.ini > > b/tester/rtems/testing/bsps/kendrytek210-renode.ini > > > new file mode 100644 > > > index 0000000..95850c5 > > > --- /dev/null > > > +++ b/tester/rtems/testing/bsps/kendrytek210-renode.ini > > > @@ -0,0 +1,38 @@ > > > +# > > > +# RTEMS Tools Project (http://www.rtems.org/ < > http://www.rtems.org/>) > > > +# Copyright 2010-2014 Chris Johns (chr...@rtems.org > > <mailto:chr...@rtems.org>) > > > +# All rights reserved. > > > +# > > > +# This file is part of the RTEMS Tools package in > 'rtems-tools'. > > > +# > > > +# Redistribution and use in source and binary forms, with or > without > > > +# modification, are permitted provided that the following > conditions > > are met: > > > +# > > > +# 1. Redistributions of source code must retain the above > copyright > > notice, > > > +# this list of conditions and the following disclaimer. > > > +# > > > +# 2. Redistributions in binary form must reproduce the above > > copyright notice, > > > +# this list of conditions and the following disclaimer in the > > documentation > > > +# and/or other materials provided with the distribution. > > > +# > > > +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND > CONTRIBUTORS > > "AS IS" > > > +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT > LIMITED > > TO, THE > > > +# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A > PARTICULAR > > PURPOSE > > > +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR > > CONTRIBUTORS BE > > > +# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, > EXEMPLARY, OR > > > +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, > PROCUREMENT OF > > > +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR > PROFITS; OR > > BUSINESS > > > +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF > LIABILITY, WHETHER IN > > > +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE > OR OTHERWISE) > > > +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF > ADVISED > > OF THE > > > +# POSSIBILITY OF SUCH DAMAGE. > > > +# > > > + > > > +# > > > +# The Kendrytek210 Renode BSP > > > +# > > > +[kendrytek210-renode] > > > +bsp = kendrytek210-renode > > > +arch = riscv > > > +tester = %{_rtscripts}/renode.cfg > > > +bsp_resc_script = > %{_rtscripts}/renode_scripts/kendrytek210.resc > > > diff --git a/tester/rtems/testing/renode.cfg > > b/tester/rtems/testing/renode.cfg > > > new file mode 100644 > > > index 0000000..49e84a5 > > > --- /dev/null > > > +++ b/tester/rtems/testing/renode.cfg > > > @@ -0,0 +1,64 @@ > > > +# > > > +# RTEMS Tools Project (http://www.rtems.org/ < > http://www.rtems.org/>) > > > +# Copyright 2010-2014 Chris Johns (chr...@rtems.org > > <mailto:chr...@rtems.org>) > > > +# All rights reserved. > > > +# > > > +# This file is part of the RTEMS Tools package in > 'rtems-tools'. > > > +# > > > +# Redistribution and use in source and binary forms, with or > without > > > +# modification, are permitted provided that the following > conditions > > are met: > > > +# > > > +# 1. Redistributions of source code must retain the above > copyright > > notice, > > > +# this list of conditions and the following disclaimer. > > > +# > > > +# 2. Redistributions in binary form must reproduce the above > > copyright notice, > > > +# this list of conditions and the following disclaimer in the > > documentation > > > +# and/or other materials provided with the distribution. > > > +# > > > +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND > CONTRIBUTORS > > "AS IS" > > > +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT > LIMITED > > TO, THE > > > +# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A > PARTICULAR > > PURPOSE > > > +# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR > > CONTRIBUTORS BE > > > +# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, > EXEMPLARY, OR > > > +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, > PROCUREMENT OF > > > +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR > PROFITS; OR > > BUSINESS > > > +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF > LIABILITY, WHETHER IN > > > +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE > OR OTHERWISE) > > > +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF > ADVISED > > OF THE > > > +# POSSIBILITY OF SUCH DAMAGE. > > > +# > > > + > > > +# > > > +# Renode > > > +# > > > +# Use a renode command to run the executable in the renode > simulator. > > > +# > > > + > > > +%include %{_configdir}/base.cfg > > > +%include %{_configdir}/checks.cfg > > > + > > > +# > > > +# Console. > > > +# > > > +%define console_telnet > > > +%include %{_configdir}/console.cfg > > > + > > > +# > > > +# RTEMS version > > > +# > > > +%include %{_rtdir}/rtems/version.cfg > > > + > > > + > > > +# > > > +# Renode executable > > > +# > > > +%define renode_cmd renode --hide-monitor > > > +%define binary_opts -e $bin?=@%{test_executable} > > > +%define start_opts -e "s @%{bsp_resc_script}" > > > +%define trim_command sed 's/.*\[output\] //' > > > + > > > + > > > +# > > > +# Executable > > > +# > > > +%execute %{renode_cmd} %{binary_opts} %{start_opts} | > %{trim_command} > > > diff --git > a/tester/rtems/testing/renode_scripts/kendrytek210.resc > > b/tester/rtems/testing/renode_scripts/kendrytek210.resc > > > new file mode 100644 > > > index 0000000..fe13aa8 > > > --- /dev/null > > > +++ b/tester/rtems/testing/renode_scripts/kendrytek210.resc > > > @@ -0,0 +1,53 @@ > > > +using sysbus > > > +using monitor > > > + > > > +mach create "K210" > > > + > > > +machine LoadPlatformDescription > @platforms/cpus/kendryte_k210.repl > > > + > > > +path add @/ > > > + > > > +showAnalyzer "uartAnalyzer" uart > > Antmicro.Renode.Analyzers.LoggingUartAnalyzer > > > +uartAnalyzer TimestampFormat None > > > + > > > +set report_repeating_line """ > > > +from Antmicro.Renode.Logging import ConsoleBackend > > > +ConsoleBackend.Instance.ReportRepeatingLines = True > > > +""" > > > + > > > +set add_hook """ > > > +def match(line): > > > + ok_to_kill_lines = [ > > > + '*** TEST STATE: USER_INPUT', > > > + '*** TEST STATE: BENCHMARK', > > > + '*** END OF TEST ', > > > + '*** FATAL ***' > > > + ] > > > + return any(l in line for l in ok_to_kill_lines) > > > + > > > +def hook(line): > > > + monitor.Parse("q") > > > + > > > > > > > +Antmicro.Renode.Hooks.UartHooksExtensions.AddLineHook(monitor.Machine["sysbus.uart"], > match, hook) > > > +""" > > > + > > > +python $add_hook > > > + > > > +python $report_repeating_line > > > + > > > +sysbus Tag <0x50440000 0x10000> "SYSCTL" > > > +sysbus Tag <0x50440018 0x4> "pll_lock" 0xFFFFFFFF > > > +sysbus Tag <0x5044000C 0x4> "pll1" > > > +sysbus Tag <0x50440008 0x4> "pll0" > > > +sysbus Tag <0x50440020 0x4> "clk_sel0" > > > +sysbus Tag <0x50440028 0x4> "clk_en_cent" > > > +sysbus Tag <0x5044002c 0x4> "clk_en_peri" > > > + > > > +# enable uart tx > > > +uart WriteDoubleWord 0x8 0x1 > > > + > > > +macro reset > > > +""" > > > + sysbus LoadELF $bin > > > +""" > > > +runMacro $reset > > _______________________________________________ > > devel mailing list > > devel@rtems.org <mailto:devel@rtems.org> > > http://lists.rtems.org/mailman/listinfo/devel > > <http://lists.rtems.org/mailman/listinfo/devel> > > > > _______________________________________________ > > devel mailing list > > devel@rtems.org <mailto:devel@rtems.org> > > http://lists.rtems.org/mailman/listinfo/devel > > <http://lists.rtems.org/mailman/listinfo/devel> > > > _______________________________________________ > devel mailing list > devel@rtems.org > http://lists.rtems.org/mailman/listinfo/devel
_______________________________________________ devel mailing list devel@rtems.org http://lists.rtems.org/mailman/listinfo/devel
