Hi Kofi, Yes i am using master branch to build sel4 kernel. the issue because of wrong config variable used in autoconf.h file which caused this issue. After fixing the correct config the build going ahead and failed with below reason saying unrecognized the command line option '-marm'.
Do you have any idea what would be the problem to cause this issue ?. Also tried with different toolchain but the result remain same. ~/sel4KER/seL4$ make TOOLPREFIX=aarch64-linux-gnu- SEL4_ARCH=aarch64 PLAT=tx1 ARMV=armv8-a CPU=cortex-a53 ARCH=arm [TOUCH] sources_list_updated [CPP_GEN] kernel_all.c [BF_GEN] arch/object/structures_gen.h [BF_GEN] plat/machine/hardware_gen.h [BF_GEN] 64/mode/api/shared_types_gen.h [CPP] kernel_all.c_pp [CC] kernel_final.s aarch64-linux-gnu-gcc: error: unrecognized command line option ‘-marm’ make: *** [kernel_final.s] Error 1 rm plat/machine/hardware_gen.h arch/object/structures_gen.h 64/mode/api/shared_types_gen.h Regards, Munees On Tue, Oct 10, 2017 at 4:45 AM, <kofidoku.at...@data61.csiro.au> wrote: > Munees, > > Could you give me more information such as, which project you're trying to > build? Is it seL4test? Which revisions of the repositories are you trying > to build here? Are they all git "master" branches? Sorry but I can't intuit > much from what I see there, and we have most of the master branches in > regression so it's unlikely the build is broken on master. > > -- > Kofi Doku Atuah > Kernel engineer > DATA61 | CSIRO > > ------------------------------ > *From:* Muneeswaran Rajendran <m.rajend...@matellio.com> > *Sent:* 06 October 2017 18:45 > *To:* Atuah, Kofi Doku (Data61, Kensington NSW) > *Cc:* devel@sel4.systems > *Subject:* Re: [seL4] does seL4 support NVIDIA Jetson Tx2 board ? > > Hi kofidoku, > > Thanks for detailed input. I try to build seL4 for tx1 platform there was > compilation error autoconf.h missing in the include folder. > > drwxrwxr-x 2 spanidea spanidea 4096 Oct 6 11:46 tk1 > drwxrwxr-x 2 spanidea spanidea 4096 Sep 5 07:28 am335x > drwxrwxr-x 2 spanidea spanidea 4096 Sep 5 07:28 apq8064 > -rw-rw-r-- 1 spanidea spanidea 992 Sep 5 07:28 arm_verified.cmake > drwxrwxr-x 2 spanidea spanidea 4096 Sep 5 07:28 exynos4 > drwxrwxr-x 2 spanidea spanidea 4096 Sep 5 07:28 exynos5 > drwxrwxr-x 2 spanidea spanidea 4096 Sep 5 07:28 hikey > drwxrwxr-x 2 spanidea spanidea 4096 Sep 5 07:28 imx31 > drwxrwxr-x 2 spanidea spanidea 4096 Sep 5 07:28 imx6 > drwxrwxr-x 2 spanidea spanidea 4096 Sep 5 07:28 imx7 > drwxrwxr-x 2 spanidea spanidea 4096 Sep 5 07:28 omap3 > drwxrwxr-x 2 spanidea spanidea 4096 Sep 5 07:28 pc99 > drwxrwxr-x 2 spanidea spanidea 4096 Sep 5 07:28 zynq7000 > > I have created the tx1 folder and copy the tk1/autoconf.h file into it. > > drwxrwxr-x 2 spanidea spanidea 4096 Oct 6 12:27 tx1 > > Later the compilation failed with below error messages > > [MKDIR] arch/object > [PBF_GEN] arch/object/structures.pbf > [PBF_GEN] plat/machine/hardware.pbf > [PBF_GEN] 32/mode/api/shared_types.pbf > [BF_GEN] arch/object/structures_gen.h > [BF_GEN] plat/machine/hardware_gen.h > [BF_GEN] 32/mode/api/shared_types_gen.h > [CPP] src/arch/arm/armv/armv8-a/32/machine_asm.s_pp > [AS] src/arch/arm/armv/armv8-a/32/machine_asm.o > [CPP] src/arch/arm/32/head.s_pp > [AS] src/arch/arm/32/head.o > [CPP] src/arch/arm/32/traps.s_pp > [AS] src/arch/arm/32/traps.o > [CPP] src/arch/arm/32/hyp_traps.s_pp > [AS] src/arch/arm/32/hyp_traps.o > [CPP_GEN] kernel_all.c > [CPP] kernel_all.c_pp > src/arch/arm/object/vcpu.c:109:2: error: #error GIC_PL400_VCPUCTRL_PPTR > must be defined for virtual memory access to the gic virtual cpu interface > control > make: *** [kernel_all.c_pp] Error 1 > rm 32/mode/api/shared_types_gen.h src/arch/arm/32/traps.s_pp > plat/machine/hardware_gen.h src/arch/arm/32/head.s_pp > src/arch/arm/armv/armv8-a/32/machine_asm.s_pp > src/arch/arm/32/hyp_traps.s_pp arch/object/structures_gen.h > > the macro 'GIC_PL400_VCPUCTRL_PPTR' was not defined in the > 'include/plat/tx1/plat/machine/devices.h' hence compilation failed. But > this macro was defined in tk1 include file. > > can you please share the correct autoconf file for tx1 platform to build > seL4 kernal. > > Regards, > Munees > > On Fri, Oct 6, 2017 at 12:20 PM, <kofidoku.at...@data61.csiro.au> wrote: > >> Hey Munes and Ashok, >> >> >> To my knowledge, seL4 supports the TX1 SoC, but not the TX2 explicitly. >> >> >> If the TX1 and TX2 behave similarly, then there's probably a lot of code >> that can be shared between them. I can't comment on whether or not they are >> similar enough though. >> >> >> That said, to help you begin the search to find out, you can look through >> the code we currently have for the TK1 and TX1. So the way the codebase is >> organized for the TK1 and TX1 right now, the common drivers for both of >> them are in libplatsupport/src/mach/nvidia (https://github.com/seL4/util_ >> libs/tree/master/libplatsupport/src/mach/nvidia). >> >> We personally have, internally, 3 boards for which the TK1 and TX1 SoCs >> are common: >> (1) Colorado TK1-SOM. >> (2) Nvidia Jetson TK1 >> (3) Some TX1-based board which I don't know much about off the top of my >> head. >> >> The two TK1 platforms use the same "plat" code in >> libplatsupport/src/plat/tk1: https://github.com/seL4/util_li >> bs/tree/master/libplatsupport/src/plat/tk1 >> And I see a TX1 platform folder here as well, though I'm not familiar >> with it myself (and frankly the files are empty anyway): >> https://github.com/seL4/util_libs/tree/master/libplatsupport/src/plat/tx1 >> >> >> -- >> Kofi Doku Atuah >> Kernel engineer >> DATA61 | CSIRO >> >> _______________________________________________ >> Devel mailing list >> Devel@sel4.systems >> https://sel4.systems/lists/listinfo/devel >> >> > > _______________________________________________ > Devel mailing list > Devel@sel4.systems > https://sel4.systems/lists/listinfo/devel > >
_______________________________________________ Devel mailing list Devel@sel4.systems https://sel4.systems/lists/listinfo/devel
