Hi Munees,
I went through some methods for how to boot the seL4 kernel on a stock TX1 board yesterday and wrote this guide: https://wiki.sel4.systems/Hardware/jetsontx1 It goes through the steps for getting seL4 booted using an SD Card, the internal 15GiB mass storage on the TX1, or using a USB cable and the DFU protocol.? DFU is probably a lot faster/better for you f you're doing active development. Could you try one of these methods and let me know if any of them works for you? -- Kofi Doku Atuah Kernel engineer DATA61 | CSIRO
_______________________________________________ Devel mailing list [email protected] https://sel4.systems/lists/listinfo/devel
