Hi Munees, I am afraid I can't be much help, but I can offer some tips for debug printing.
The elfloader boots the kernel with unity mappings. If you would like to use debug printing before the kernel maps the serial port, try changing UARTA_PPTR to UARTA_PADDR in the UART driver: https://github.com/seL4/seL4/blob/master/src/plat/tx1/machine/io.c#L23 - Alex On Sat, 2017-11-11 at 11:26 +0530, Muneeswaran Rajendran wrote: > Hi, > > I am trying to bring up sel4 on tegra Tx2 platform using tegra Tx1 as > reference. > > I tweaked the important changes of UART,Timer configuration and IRQ > number and also GIC controller, GIC distributor configuration w.r.t > Tx2 > > after loading and booting the Tx2 board sel4 enter into init kernel > to initialize the kerenl memory map for GIC and UART devices then > control transfer to user space. I underdtand from ref manual both Tx1 > and Tx2 using the same clock and baud rate for UART configuration. > > ## Starting application at 0x82000000 ... > > ELF-loader started on CPU: ARM Ltd. Cortex-A57 r1p3 > paddr=[82000000..827abfff] > kernel_phys_start: 0xffffffff80000000 > kernel_phys_end:0xffffffff8022fcdf > load_elf : image_size 0x230000 > ELF-loading image 'kernel' > paddr=[80000000..8022ffff] > vaddr=[ffffff8000000000..ffffff800022ffff] > virt_entry=ffffff8000000000 > load_elf : image_size 0x5e9000 > ELF-loading image 'sel4test-driver' > paddr=[80230000..80818fff] > vaddr=[400000..9e8fff] > virt_entry=41b160 > Enabling MMU and paging > Jumping to kernel-image entry point... > > Also try to add debug print in the init kernel thread to understand > the virtual memory set-up but its crashed with synchronous exception. > > It indicates that the UART driver till not available to log the > messages this was seen in Tx1 and Tx2. Not able to check/debug > further on this issue. > > Also experimented with various arbitrary address for UARTA_PPTR and > GIC_PPTR because Tx1 UARTA has 64byte size in case of Tx2 its 1MB.but > still nothing has improved the state remain same. > > I completely walk through the sel4 boot and arm MMU code.I do not see > any board specific changes in this code apart from UART,GIC > configuration and IRQ number. The assembly code of MMU mainly setting > up TCR ,TTBR , TLB invalidation and pagetable setup for arma-57. > > Please let me know your thought on this issue and how do debug this > kind of issue. > > Regards, > Munees > > > _______________________________________________ > Devel mailing list > Devel@sel4.systems > https://sel4.systems/lists/listinfo/devel _______________________________________________ Devel mailing list Devel@sel4.systems https://sel4.systems/lists/listinfo/devel
