Hi Chris,
Thank you for the suggestion. I removed tk1 from the efi_list (so now it is
the empty string). I rebuilt everything. Now when I run file on the
resulting image I get: capdl-loader-image-arm-tk1: ELF 32-bit LSB
executable, ARM, EABI5 version 1 (SYSV), statically linked, with
debug_info, not stripped
Running readelf -h on the file returns:
ELF Header:
Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00
Class: ELF32
Data: 2's complement, little endian
Version: 1 (current)
OS/ABI: UNIX - System V
ABI Version: 0
Type: EXEC (Executable file)
Machine: ARM
Version: 0x1
Entry point address: 0x817f0000
Start of program headers: 52 (bytes into file)
Start of section headers: 20647556 (bytes into file)
Flags: 0x5000200, Version5 EABI, soft-float
ABI
Size of this header: 52 (bytes)
Size of program headers: 32 (bytes)
Number of program headers: 2
Size of section headers: 40 (bytes)
Number of section headers: 20
Section header string table index: 19
I copied that image to the SD card and tried to boot with fatload followed
by bootelf. It sits there doing nothing for a little while (maybe a minute)
then resets the CPU:
Tegra124 (Jetson TK1) # bootelf ${loadaddr}
## Starting application at 0x817f0000 ...
data abort
pc : [<817f7590>] lr : [<817f7650>]
reloc pc : [<019ba590>] lr : [<019ba650>]
sp : 81809f98 ip : 00000002 fp : 81809fb4
r10: 00000000 r9 : fd7ffed0 r8 : 00000014
r7 : fda60610 r6 : 00000000 r5 : 823b117c r4 : 81000000
r3 : ffffffff r2 : ffffefff r1 : fda60610 r0 : 82b7aa40
Flags: Nzcv IRQs off FIQs off Mode SVC_32
Code: e50b300c e51b3018 e5932000 e51b300c (e5933000)
Resetting CPU ...
resetting ...
U-Boot SPL 2020.01-00442-gc00bd81ae0 (Jan 10 2020 - 11:10:18 -0500)
Trying to boot from RAM
This is all with basically a fresh clone of the camkes-arm-vm-manifest git
project then doing "../init-build.sh -DAARCH32=TRUE -DTk1Insecure=TRUE
-DCAMKES_VM_APP=vm_minimal -DPLATFORM=tk1" then "ninja" in the build folder.
Mike
On Mon, Jan 27, 2020 at 9:58 AM Chris Guikema <chris.guik...@dornerworks.com>
wrote:
> Mike,
>
>
>
> Do you happen to have the “ApplyData61ElfloaderSettings()” command in your
> project files?
>
>
>
> function(ApplyData61ElfLoaderSettings kernel_platform kernel_sel4_arch)
>
> set(
>
> binary_list
>
> "tx1;hikey;am335x;odroidc2;imx8mq-evk;rockpro64;imx8mm-evk;hifive"
>
> )
>
> set(efi_list "tk1")
>
> set(uimage_list "tx2")
>
>
>
> That sets any compiled images for the tk1 to be efi. You can remove the
> “tk1” from the “efi_list” and running “ccmake .” should allow you to choose
> the output setting as an elf. I’ve seen some issues where efi images don’t
> boot properly, but not with u-boot, so I can’t be sure your exact problem.
>
>
>
> Thanks,
>
> Chris Guikema
>
>
>
> DornerWorks
>
>
>
> *From:* Mike Clark <undefinedsp...@gmail.com>
> *Sent:* Monday, January 27, 2020 8:53 AM
> *To:* Shen, Yanyan (Data61, Kensington NSW) <yanyan.s...@data61.csiro.au>
> *Cc:* Chris Guikema <chris.guik...@dornerworks.com>; devel@sel4.systems
> *Subject:* Re: [seL4] Problem booting camkes arm vmm on TK1 from SD Card
>
>
> CAUTION: This email originated from outside the organization. Do not click
> links or open attachments unless you recognize the sender and know the
> content is safe.
>
> Thanks.
>
>
>
> I checked the output of file and it does list it as MS-DOS executable.
>
>
>
> Now I tried
>
> # fatload mmc 1 ${loadaddr} capdl-loader-image-arm-tk1
>
> # bootefi ${loadaddr}
>
>
>
> After that I get nothing. The system just sits there and I get no further
> output.
>
>
>
> Anything else I can try? Is there any way to change the type of image that
> is getting created? I never had any issues with bootelf before and my old
> elf images still work.
>
>
>
> Mike
>
>
>
> On Sat, Jan 25, 2020 at 10:03 AM Shen, Yanyan (Data61, Kensington NSW) <
> yanyan.s...@data61.csiro.au> wrote:
>
> Hi Mike,
>
> Could you run "file images/capdl-loader-image-arm-tk1"?
> If you see "images/capdl-loader-image-arm-tk1: MS-DOS executable", the
> image is an EFI image, so bootefi command should help.
>
> Also, the link, https://docs.sel4.systems/Hardware/jetsontk1.html, may
> be helpful.
>
>
> Regards,
> Yanyan
>
> On Fri, 2020-01-24 at 15:24 -0500, Mike Clark wrote:
> > Chris,
> >
> > Looks like I might have spoken too soon. When I use go instead of
> > bootelf, the board actually resets. Here are the log messages:
> >
> > Tegra124 (Jetson TK1) # fatload mmc 1 0x82000000 capdl-loader-image-
> > arm-tk1
> > 20435184 bytes read in 964 ms (20.2 MiB/s)
> > Tegra124 (Jetson TK1) # go 0x82000000
> > ## Starting application at 0x82000000 ...
> > data abort
> > pc : [<82000110>] lr : [<fff51d84>]
> > reloc pc : [<021c3110>] lr : [<80114d84>]
> > sp : fd7f8610 ip : 00000002 fp : fff6be40
> > r10: 00000002 r9 : fd7ffed0 r8 : fffcbe9c
> > r7 : fda60420 r6 : 82000000 r5 : 00000001 r4 : 00000000
> > r3 : 82000000 r2 : fda60424 r1 : fda60424 r0 : 00006090
> > Flags: nzCv IRQs off FIQs off Mode SVC_32
> > Code: 00000000 00000000 00000000 42100040 (7865742e)
> > Resetting CPU ...
> >
> > resetting ...
> >
> > U-Boot SPL 2020.01-00442-gc00bd81ae0 (Jan 10 2020 - 11:10:18 -0500)
> > Trying to boot from RAM
> >
> >
> > U-Boot 2020.01-00442-gc00bd81ae0 (Jan 10 2020 - 11:10:18 -0500)
> >
> > SoC: tegra124
> > Reset cause: SW_MAIN
> > Model: NVIDIA Jetson TK1
> > Board: NVIDIA Jetson TK1
> > DRAM: 2 GiB
> > MMC: sdhci@700b0400: 1, sdhci@700b0600: 0
> > Loading Environment from MMC... OK
> > In: serial
> > Out: serial
> > Err: serial
> > Net: No ethernet found.
> > Hit any key to stop autoboot: 0
> > Tegra124 (Jetson TK1) #
> >
> > Doing readelf on the image that is being built doesn't work either
> >
> > $ readelf -h capdl-loader-image-arm-tk1
> > readelf: Error: Not an ELF file - it has the wrong magic bytes at the
> > start
> >
> > My old images from a year ago still boot just fine with bootelf. Any
> > thoughts?
> >
> > Mike
> >
> > On Fri, Jan 10, 2020 at 3:46 PM Mike Clark <undefinedsp...@gmail.com>
> > wrote:
> > > That did the trick Chris. Thanks!
> > >
> > > On Fri, Jan 10, 2020 at 3:30 PM Chris Guikema <
> > > chris.guik...@dornerworks.com> wrote:
> > > > Mike,
> > > >
> > > >
> > > >
> > > > Can you do a readelf of your outputted image to make sure its not
> > > > compiling as a binary? If it is, you’ll have to use the “go”
> > > > command in u-boot instead.
> > > >
> > > >
> > > >
> > > > Thanks,
> > > >
> > > > Chris Guikema
> > > >
> > > >
> > > >
> > > > DornerWorks
> > > >
> > > >
> > > >
> > > > From: Devel <devel-bounces@sel4.systems> On Behalf Of Mike Clark
> > > > Sent: Friday, January 10, 2020 3:22 PM
> > > > To: devel@sel4.systems
> > > > Subject: [seL4] Problem booting camkes arm vmm on TK1 from SD
> > > > Card
> > > >
> > > >
> > > >
> > > > CAUTION: This email originated from outside the organization. Do
> > > > not click links or open attachments unless you recognize the
> > > > sender and know the content is safe.
> > > > I'm using the docker image to build the CAmkES ARM VMM project
> > > > using roughly the instructions here:
> > > > https://docs.sel4.systems/VM/CAmkESARMVM.html (they are slightly
> > > > out of date).
> > > >
> > > >
> > > >
> > > > I do:
> > > >
> > > >
> > > >
> > > > ../init-build.sh -DAARCH32=TRUE -DCAMKES_VM_APP=vm_minimal
> > > > -DPLATFORM=tk1
> > > >
> > > > ninja
> > > >
> > > >
> > > >
> > > > Then I copy the resulting image from the images directory to an
> > > > SD card and put that in my TK1.
> > > >
> > > >
> > > >
> > > > When U-Boot starts I use the following commands to try to boot
> > > >
> > > >
> > > >
> > > > fatload mmc 1 0x10000000 capdl-loader-image-arm-tk1
> > > >
> > > > bootelf 0x10000000
> > > >
> > > >
> > > >
> > > > To which I get an error: No elf image at address 0x10000000
> > > >
> > > >
> > > >
> > > > I tried with an older version of U-Boot (that worked following
> > > > this same procedure about a year ago). It is U-Boot SPL 2014.10-
> > > > rc2-g3127911 (Jun 07 2016 - 21:00:01)
> > > >
> > > >
> > > >
> > > > I also tried updating U-Boot to U-Boot SPL 2020.01-00442-
> > > > gc00bd81ae0 (Jan 10 2020 - 11:10:18 -0500). Same error.
> > > >
> > > >
> > > >
> > > > Any thoughts or suggestions on how I get this to boot?
> > > >
> >
> > _______________________________________________
> > Devel mailing list
> > Devel@sel4.systems
> > https://sel4.systems/lists/listinfo/devel
>
>
_______________________________________________
Devel mailing list
Devel@sel4.systems
https://sel4.systems/lists/listinfo/devel
