hi, as explained in bug #465, support for the s3 trio64 v2/dx/gx was ported from 3.3.6. now, i've installed the snapshot 4.3.99.901 to try it (on a p200 mmx, 64 mb of ram, slackware 8.1, kernel 2.4.23) small disclaimer: i am by no means a developer, i just wanted to try this new s3 driver so i can finally use XFree86 v4.x instead of 3.3.6 on this computer, and i hope my feedback is of any use to you.
i can use color depth of 8 bits without problems, but when i try 16 bits, i just get a blank screen (doesn't exit with failure). it claims i have insufficient memory for the 1280x1024 or 1024x768 modes. it detects i have 2048kb of video ram, which is indeed not enough (1280x1024x16=2560kb necessary) but it should be sufficient to give 1024x768 at least. this all used to work under 3.3.6 (even 1280x1024!) sometimes i also get a screen with a vertical stripe of any color while switching between modes using ctrl-alt-+/- (tried that twice, it locks my system completely). log follows below (while trying 1024x768x16). one other remark: in the card list of the xf86config script, the video chip name s3 trio64 v2/dx/gx and numbers s3 86C775/86C785 are not linked to the s3 driver, even though they are supported in this new version. regards, steven. --------- _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/batcher:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.99.901 (4.4.0 RC 1) Release Date: 2 December 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.7-10custom i686 [ELF] Current Operating System: Linux batcher 2.4.23 #1 Sat Nov 29 12:44:37 CET 2003 i586 Build Date: 05 December 2003 Changelog Date: 03 December 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Tue Dec 9 09:52:26 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "dell" (**) | |-->Device "s3 trio64" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc101" (**) XKB: model: "pc101" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "DontZap" "off" (**) Option "DontZoom" "off" (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.7 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.99.901, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.99.901, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.7 (--) using VT number 7 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7100 card 0000,0000 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 01 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 01 class 06,80,00 hdr 00 (II) PCI: 00:10:0: chip 5333,8901 card 1028,4076 rev 16 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:16:0) S3 Inc. 86c775/86c785 [Trio 64V2/DX or /GX] rev 22, Mem @ 0xf8000000/26 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [1] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [2] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [1] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [2] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [9] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.3.99.901, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.3.99.901, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.3.99.901, module version = 1.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "speedo" (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a (II) Module speedo: vendor="The XFree86 Project" compiled for 4.3.99.901, module version = 1.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Speedo (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project & the After X-TT Project" compiled for 4.3.99.901, module version = 2.1.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.3.99.901, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.3.99.901, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "s3" (II) Loading /usr/X11R6/lib/modules/drivers/s3_drv.o (II) Module s3: vendor="The XFree86 Project" compiled for 4.3.99.901, module version = 0.3.5 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.7 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.3.99.901, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.4 (II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968, Trio32/64, Aurora64V+, Trio64UV+, Trio64V2/DX/GX (II) Primary Device is: PCI 00:10:0 (--) Assigning device section with no busID to primary device (--) Chipset Trio64V2/DX/GX found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [9] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [6] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [7] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [8] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [11] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [12] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [13] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [14] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.3.99.901, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.7 (II) s3(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (**) s3(0): Depth 16, (--) framebuffer bpp 16 (==) s3(0): RGB weight 565 (==) s3(0): Default visual is TrueColor (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.3.99.901, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.7 (II) s3(0): Primary V_BIOS segment is: 0xc000 (WW) System lacks support for changing MTRRs (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.3.99.901, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.7 (II) s3(0): VESA BIOS detected (II) s3(0): VESA VBE Version 2.0 (II) s3(0): VESA VBE Total Mem: 2048 kB (II) s3(0): VESA VBE OEM: S3 Incorporated. 86C775/86C785 (II) s3(0): VESA VBE OEM Software Rev: 1.1 (II) s3(0): VESA VBE OEM Vendor: S3 Incorporated. (II) s3(0): VESA VBE OEM Product: Trio64V2/DX/GX (II) s3(0): VESA VBE OEM Product Rev: Rev E (==) s3(0): Using gamma correction (1.0, 1.0, 1.0) (**) s3(0): Chipset: "Trio64V2/DX/GX" (--) s3(0): Framebuffer @ 0xf8000000 (--) s3(0): MMIO @ 0xf9000000 (--) s3(0): videoRam = 2048 Kb (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.3.99.901, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.7 (--) s3(0): MCLK 54.886 Mhz (--) s3(0): RefClock: 16000 (--) s3(0): Max pixel clock at this depth is 80 Mhz (II) s3(0): dell: Using hsync range of 31.50-82.00 kHz (II) s3(0): dell: Using vrefresh range of 40.00-150.00 Hz (II) s3(0): Clock range: 15.60 to 80.00 MHz (II) s3(0): Not using mode "1280x1024" (insufficient memory for mode) (II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1280x960" (insufficient memory for mode) (II) s3(0): Not using default mode "1280x960" (insufficient memory for mode) (II) s3(0): Not using default mode "640x480" (hsync out of range) (II) s3(0): Not using default mode "640x512" (hsync out of range) (II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) s3(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) s3(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) s3(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) s3(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) s3(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) s3(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) s3(0): Not using default mode "1600x1024" (insufficient memory for mode) (II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) s3(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) s3(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) s3(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) s3(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) s3(0): Not using mode "1280x1024" (no mode of this name) (II) s3(0): Not using default mode "1152x768" (width too large for virtual size) (--) s3(0): Virtual size is 1024x768 (pitch 1024) (**) s3(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz (II) s3(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (**) s3(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (II) s3(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (**) s3(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (II) s3(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (**) s3(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) s3(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (**) s3(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) s3(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (**) s3(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (II) s3(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) s3(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) s3(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (**) s3(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) s3(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (**) s3(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) s3(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) s3(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) s3(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (**) s3(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D) (II) s3(0): Modeline "700x525" 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (**) s3(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D) (II) s3(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (**) s3(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D) (II) s3(0): Modeline "640x512" 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (**) s3(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D) (II) s3(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (**) s3(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) s3(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (**) s3(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) s3(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (**) s3(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) s3(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (**) s3(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D) (II) s3(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (**) s3(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz (II) s3(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (**) s3(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) s3(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (**) s3(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D) (II) s3(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (**) s3(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) s3(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (**) s3(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D) (II) s3(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync (**) s3(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D) (II) s3(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (**) s3(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D) (II) s3(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (**) s3(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D) (II) s3(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (**) s3(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) (II) s3(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (**) s3(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D) (II) s3(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (**) s3(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D) (II) s3(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (**) s3(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D) (II) s3(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (**) s3(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D) (II) s3(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (**) s3(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) (II) s3(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (**) s3(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) (II) s3(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (**) s3(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D) (II) s3(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync (**) s3(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D) (II) s3(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (**) s3(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D) (II) s3(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync (**) s3(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D) (II) s3(0): Modeline "360x200" 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync (**) s3(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D) (II) s3(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync (**) s3(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D) (II) s3(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync (==) s3(0): DPI set to (75, 75) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.3.99.901, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.3.99.901, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.7 (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B] [1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [6] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [13] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [14] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [15] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (==) s3(0): Backing store disabled (II) s3(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 color pattern filled rectangles CPU to Screen color expansion Solid Lines (II) s3(0): Acceleration enabled (II) s3(0): Using NewMMIO (II) s3(0): Using SW cursor (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (**) Option "Protocol" "Auto" (**) Mouse1: Device: "/dev/mouse" (**) Mouse1: Protocol: "Auto" (**) Option "CorePointer" (**) Mouse1: Core Pointer (**) Option "Device" "/dev/mouse" (**) Option "Emulate3Buttons" (**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50 (==) Mouse1: Buttons: 3 (II) Keyboard "Keyboard1" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) (--) Mouse1: PnP-detected protocol: "PS/2" (II) Mouse1: ps2EnableDataReporting: succeeded Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removing from list! _______________________________________________ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
