On Sun, 6 Jun 2004 03:11 am, you wrote: > I determined the necessary register values by comparing register dumps > before and after BIOS-initiated disabling of the backlight. (BIOS > control only works with a non-ACPI enabled kernel) In the particular > byte that is masked and set, the 0x01 bit appears to enable/disable the > backlight and the 0x10 bit the lcd panel itself. The other bits have no > function that I could see, but they're also set to the same values that > the BIOS sets them. Any chance you can release the code / scripts you used to do the register dumping?
Brad _______________________________________________ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
