[development-axapta] Phantom Part build instructions v2.5sp1

[petdba]

I am hoping than someone can help me with an issue we are 
experiencing.  It the area of production orders and phantom part 
numbers.  We have a few configurations that use phantom part numbers 
to allow us the change the route of the configured part based on the 
selections in the configurations process. The specific configuration 
has a possibility of having for 1 to 5 levels based on the 
selections.  

Now to the problems. First, Instructions attached to the route of the 
phantom part number are not being migrating with the route to the 
upper level part number. Second, the order of the route is in the 
incorrect order.

Example configurations: Non-Italic names are actual part numbers, 
Italic names - select a part number

0360-0004-00 (route: Duplicate only)
     Rimage (Phantom- route: Rimage only[thermal print])
           Select Media (normally cdr or dvd-r)
0360-0004-00 (route: Duplicate only)
     Rimage (Phantom- route: Rimage only)
         Silkscreen (Phantom- media selection)
           03610-0001-00 (route: silkscreen CDR)
                Select Media
           
Complete configuration selections: {M= Media configuration group}
           
0360-0004-00
     -Rimage(Type:Configurable phantom w/ route) 
          --M)Silkscreen(Type:Configurable phantom w/o route)[only 
one selection]
           ---03610-0001-00 (Type:Configurable production)
                ----Select media, No. of colors,Film no.      
        
          --M)0361-0001-00(Type:item)
          --M)Select other media      
          --PrintInst(Type:Configurable item w/o bom or route)
           ---"Print per instructions","Print per file", "Print 
per master"
     -Duplication(Type: Configurable phantom w/o route)
          --Select media
     -Silkscreen(Type:Configurable phantom w/o route)[only one 
selection]
         --03610-0001-00 (Type:Configurable production)
           ---Select media, No. of colors,Film no.
     -Injket(Type:Configurable phantom w/ route)***
          --Select media
          --PrintInst(Type:Configurable item w/o bom or route)
           ---"Print per instructions","Print per file", "Print 
per master"

***These instructions, in form of a NOTE on the description tab of 
the route, are not migrating with the route to the 0360-0004-00 route 
after the production order is estimated.

     
Patrick DeLeon  ([EMAIL PROTECTED] )
Logic General, Inc. - Information Technology Services



Yahoo! Groups Sponsor	 
ADVERTISEMENT
Click Here!	
	

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.