Hi
aigie,
during tranfer if the item is serial
number controlled then you have to enter seperate lines. this functionality i
believe is fine as if you don't enter the serial nos then how do the system know
which serial nos has it transfered?
If there is always a possiblity that
you transfer all the serial nos at one go then you may have to write a code to
create lines with seperate lines for all the serial numbers available. say
you can have a button on the transfer journal which would create the lines. once
lines are created you have to post.
In
standard axapta i don't think there is a functionality of transfering a groups
of serial nos by not entering individual lines.
cheers,
Girish
-----Original Message-----Hi all,
From: my_ag [mailto:[EMAIL PROTECTED]
Sent: 28 January 2004 02:04
To: [EMAIL PROTECTED]
Subject: [development-axapta] Inventory transfer - Question
Need help here.
The requirement:
To transfer item from one location to another.
However, i am transfering not 1 qty but many qty with respective
serial numbers.
How to record in system (inventory transfer journal) where i transfer
all the serial numbers at one go, from one location to another,
without having to create separate lines for each serial numbers?
thanks,
aigie
Yahoo! Groups Links
- To visit your group on the web, go to:
http://groups.yahoo.com/group/development-axapta/
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Yahoo! Groups Links
- To visit your group on the web, go to:
http://groups.yahoo.com/group/development-axapta/
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
