check that the two users are both starting in the same language.
If so try this:
1. Shut down the AOS.
2. Delete the file ax122<lang>.ali
3. Start axapta client on server in 2 tier mode searche any label, Axapta should now recreate the file *.ali if not existing.
4. Start the AOS again.
/Jesper
-------- Original Message --------
Subject: [development-axapta] Label with special user (02-Feb-2004 13:22)
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
> Hi,
>
> Axapta 3.0 SP2 - 3 tier environment.
> When starting application with user "admin"/usergroup "admin" -
> customerspecial labels are only shown with number e.g. @122XXX.
> When opening application with e.g. user "test"/usergroup "admin" -
> all labels are shown in correct way.
>
> When user "admin" tries to open label-editor via AOT axapta crashes?
>
> Restarting AOS or client, opening and saving of labelfile..... does
> not solve the problem.
>
> Any hints appreciated.
>
> Best regards,
> Elia
>
>
>
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/development-axapta/
>
> To unsubscribe from this group, send an email to:
> [EMAIL PROTECTED]
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
> To: [EMAIL PROTECTED]
| Yahoo! Groups Sponsor | |
|
|
Yahoo! Groups Links
- To visit your group on the web, go to:
http://groups.yahoo.com/group/development-axapta/
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
